Audited Supplier
| 8 seater electric tour car - Legendary | ||
| Electrical System | Electrical control | Ac controller |
| Batteries | Maintenance-free battery 6V/ unit, 12 units | |
| Motor | Ac 72V/7.5KW | |
| Charger | Computer intelligent charger, input voltage 220V/180V | |
| Charging time | Less than 10 hours (80% discharge rate) | |
| Body configuration | Front stop | Laminated glass |
| Seats | Leather fabric | |
| Rearview mirror | One manual external rearview mirror on each side | |
| Top canopy | Automotive engineering material ABS blister molding | |
| Flooring | Aluminum pattern non-slip floor + red carpet | |
| Steering system | Two-way rack and pinion steering system, automatic gap compensation function, electronic direction assist | |
| DC,light and signal | 12V-400W front lights, turn signals, rear taillights, horns, and reverse buzzers | |
| Body | Automotive craft sheet metal body | |
| Instrument Table | Instrument table for injection car, voltmeter, electric meter, indicator light, electric lock switch, combination switch, speed meter. | |
| Braking System | Front disc rear hub four-wheel hydraulic brakes + handbrake parking. | |
| Front axle and suspension | Independent suspension, coil spring + cylinder type hydraulic shock absorption | |
| Rear axle and suspension | Integral rear axle, cylinder type hydraulic shock absorption | |
| Tire diameter | 155R13 | |
| Technical parameters | Length * width * height (mm) | 3820 * 1550 * 2000 |
| Rated crew (people) | 8 | |
| Maximum travel speed km/h | ≤30km/h | |
| Driving range km | 60-80km (flat road) | |
| Safe grade | 15% | |
| Minimum turning radius (m) | 7.3 m | |
| Minimum ground clearance (no load/full load) mm | 140/130 | |
| Wheelbase | 2240 mm | |
| Wheel gauge | Front 1350/ rear 1290mm | |
| Braking distance (initial speed 20Km/h; No load/full load)M | 3.1/5.0 | |
Full-sheet metal productions,simple body repair and convenience Super mileage let you worry-free throughout!
Customized design, seats optional leather seats and bus seats
The ergonomic cab design gives the driver an excellent sense of handling
Customer customized production, diversified modeling
Certifications
After Sales Services
quality guarantee
1.Our company guarantees that the supplied vehicles are brand new, unused original qualified products, and ensure that the provided vehicles have good performance during their service life under normal maintenance conditions of correct installation and normal use.
2.Our company is committed to the quality standards of the supplied vehicles in accordance with the relevant national quality and technical standards and relevant laws and regulations and provisions of the implementation of the requirements, and not lower than the original manufacturer's quality assurance regulations and relevant supply standards for the supply of counterfeit and shoddy products.
after-sales service
1.Promise to provide permanent maintenance services, vehicle warranty for one year, after the warranty period to provide paid services.
2.Regular return visit maintenance: Telephone return visit every 3 months, timely understanding of the buyer's opinions and suggestions, in order to promote the company's after-sales service work to further improve.
After-sales process
1.The customer provides product information, unit information and contact information by telephone or email message, and describes the cause of the problem to the manufacturer.
2.After receiving the information, the manufacturer will try to deal with it as soon as possible.
3.Provide a solution to the problem described by the customer until the customer is satisfied.
Workshop pictures
A:We are factory in Guizhou province,China,with more than 10 years of manufacturing experience
Q2 Do you support customized products?
A:We offer a wide range of customized products, which can be customized according to your requirements
Q3 How long is your production cycle?
A:Production cycle 30 days in peak season, 10-15 days in off-season
Q4 How about the trading term and payment term?
