Audited Supplier
Fiber Optic Cable
Communication
Single-mode Fiber
Round Wire
>1000(N/100mm)
100N<1000N
Double Core
RoHS, CE, ISO9001, VDE, CCC
OEM
TPU, LSZH, PE
1 Core / 2 Core / 4 Core
G652D/G657A1/G657A2
YOFC/Corning
Black
-20 to +60ºC
Wooden Drum
FiberMania
Carton
Shenzhen, China
Product Description
China Factory FTTA Indoor/Outdoor CPRI RRU RRH Base Station Round Cabling Armored Optical Fiber Cable
Outdoor fiber optic cable with loose tube constructions are built to withstand adverse environments and provide the maximum fiber protection. These cables perform exceptionally well in wet conditions and during extreme temperature cycles.
They can be installed in ducts, direct buried and aerial/lashed, providing the flexibility needed to meet the demands of campus backbones and other outside plant requirements.
we manufactures a wide range of cables from 2-144fibers with a variety of designs to meet the demands of most installation conditions. Only the highest quality materials are used in our fiber optic cables to ensure that the cable strength and optical integrity are not compromised. Rugged jacket materials and the addition of armor provide the right level of protection.
Outdoor fiber optic cable with loose tube constructions are built to withstand adverse environments and provide the maximum fiber protection. These cables perform exceptionally well in wet conditions and during extreme temperature cycles.
They can be installed in ducts, direct buried and aerial/lashed, providing the flexibility needed to meet the demands of campus backbones and other outside plant requirements.
we manufactures a wide range of cables from 2-144fibers with a variety of designs to meet the demands of most installation conditions. Only the highest quality materials are used in our fiber optic cables to ensure that the cable strength and optical integrity are not compromised. Rugged jacket materials and the addition of armor provide the right level of protection.
1. Good mechanical and temperature performance
2. High strength loose tube that is hydrolysis resistant
3. Specially designed compact structure is good at preventing loose tubes from shrinking
4. PE sheath protects cables form ultraviolet radiation
5. The following measure are taken to ensure the cable watertight
6. Steel wire used as the central strength member
7. Loose tube filling compound
8. 100% Cable core filling
1. Long-distance communication,LAN
2. Moisture-proof and rodent-proof
3. Duct, Aerial
Mechanical and Environmental Characteristics | |||
Item | Specification | ||
Fiber Count | 2 | 4 | |
Tension Resistance (N) | Long Term | ≥ 600 | ≥ 800 |
Short Term | ≥ 1000 | ≥ 1200 | |
Crush Resistance (N/10cm) | ≥ 3000 | ||
Nominal Weight (kg/km) | 65 | 85 | |
Operating Temperature ( ºC) | -40 ~ +80 | ||
Storage Temperature ( ºC) | -40 ~ +80 | ||
Fiber Parameters | |||||
Single Mode | |||||
Item | Unit | G652D | G657A1 | G657A2 | |
Mode Field Diameter | 1310nm | μm | 9.1±0.4 | 8.8±0.4 | 8.8±0.4 |
1550nm | μm | 10.4±0.5 | 9.8±0.5 | 9.8±0.5 | |
Cladding Diameter | μm | 125±1 | 125±0.7 | 125±0.7 | |
Cladding Non-circularity | % | ≤ 1 | ≤ 0.7 | ≤ 0.7 | |
Core-cladding Concentricity Error | μm | ≤ 0.6 | ≤ 0.5 | ≤ 0.5 | |
Coating Diameter | μm | 245±7 | 245±5 | 245±5 | |
Coating Non-circularity | % | ≤ 6.0 | ≤ 6.0 | ≤ 6.0 | |
Cladding-coating Concentricity Error | μm | ≤ 12.0 | ≤ 12.0 | ≤ 12.0 | |
Cable Cutoff Wavelength | nm | ≤ 1260 | ≤ 1260 | ≤ 1260 | |
Attenuation Coefficient | 1310nm | dB/km | ≤ 0.4 | ≤ 0.4 | ≤ 0.4 |
1550nm | dB/km | ≤ 0.3 | ≤ 0.3 | ≤ 0.3 | |
Multimode | |||||||
Item | Unit | 62.5/125 | 50/125 | OM3-150 | OM3-300 | OM4 | |
Core Diameter | μm | 62.5±2.5 | 50±2.5 | 50±2.5 | 50±2.5 | 50±2.5 | |
Cladding Diameter | μm | 125±1.0 | 125±1.0 | 125±1.0 | 125±1.0 | 125±1.0 | |
Core Non-circularity | % | ≤ 5.0 | ≤ 5.0 | ≤ 5.0 | ≤ 5.0 | ≤ 5.0 | |
Cladding Non-circularity | % | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | |
Core-cladding Concentricity Error | μm | ≤ 1.5 | ≤ 1.5 | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | |
Coating Diameter | μm | 245±7 | 245±7 | 245±7 | 245±7 | 245±7 | |
Coating Non-circularity | % | ≤ 6.0 | ≤ 6.0 | ≤ 6.0 | ≤ 6.0 | ≤ 6.0 | |
Cladding-coating Concentricity | μm | ≤ 12.0 | ≤ 12.0 | ≤ 12.0 | ≤ 12.0 | ≤ 12.0 | |
OFL Bandwidth | 850nm | MHz·km | ≥ 160 | ≥ 500 | ≥ 700 | ≥ 1500 | ≥ 3500 |
1310nm | MHz·km | ≥ 500 | ≥ 500 | ≥ 500 | ≥ 500 | ≥ 500 | |
Attenuation Coefficient | 850nm | dB/km | ≤ 3.0 | ≤ 3.0 | ≤ 3.0 | ≤ 3.0 | ≤ 3.0 |
1310nm | dB/km | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | |
Q1: What is the warranty of FiberMania's fiber patch cord?
A: FiberMania warrants that all fiber patch cords supplied are free from defects in material and workmanship for a period offive (5) years from the date of supply. All fiber optic bulk cables are UL profiled and every single cable is 100% tested.
Q2: Is it possible to customize our brand information on your fiber cable?
A: Yes, we can print your brand name onto our cable jacket and 1KM total cable length is requested.
Q3: Can you do 3D interferometer test?
A: Yes, we do the 3D test per our customer's request, we can have the pass rate over 90% and even 100% if necessary.
Q4: What is your MOQ of your products?
A: We only have MOQ for some special customized cable order, we request 1km as the total length of the bulk cable, you may
consider stock the bulk cable with us for your urgent order production.
Q5: Are free samples available from you?
A: Yes, we are always happy to offer the free samples for all of our customers' projects provided that the total cost is under
50 US dollars.
