Audited Supplier
PRODUCT DISPLAY
QUALITY IS OUR HIGHEST ASPIRATION
Medical Consumer PU Double Lumen Central Venous Catheter/kit
1. In the process of puncture, the puncture point of anatomy must be clear, and the anatomical relationship must be clear. If necessary, central venipuncture can be carried out under the guidance of color ultrasound to avoid damage to the surrounding arteries and nerves;
2. In the process of puncture, the principle of asepsis must be followed. After successful puncture, aseptic disinfection should be carried out 1-2 times a day after embedding the central vein catheter, and sterile dressing should be strictly covered to avoid catheter infection;
3. After the success of the central venous puncture tube insertion.we, must be 1 to 2 times daily for heparin closed, at the same time, general advice given heparin to prevent anticoagulant treatment, lest cause around puncture for deep vein thrombosis, caused by limb swelling or the change of the temperature, color, once appear, limb swelling, should pay attention to whether have chest tightness, shortness of breath, chest pain, etc. The symptoms of pulmonary embolism, Give timely symptomatic treatment;
4. During the whole process of central venous catheterization, we must pay close attention to the temperature and color changes of the limbs, and pay attention to whether the limbs appear swelling and whether the range of motion has changed. If so, we should carry out color ultrasound examination in time, excluding some complications.
2. The design of Delta wing shape will reduce the friction when it is fixed onto patient's body. It is more safer and more
3. X-ray line can be observed with the whole tube, which can ensure the patients' safety when indwelling.
| Lumen Design | Catheter specification length(cm) | Dilator OD (mm) | Guide wire(OD*length) | Y shaped syringe needle/ Raulerson spring-wire introducion syringe | Remarks |
| Single Lumen | 14G*16cm | 2.7 | 0.032*60cm | available | / |
| 14G*20cm | 2.7 | 0.032*60cm | available | / | |
| 14G*30cm | 2.7 | 0.032*70cm | available | / | |
| 16G*16cm | 2.0 | 0.032*60cm | available | / | |
| 16G*20cm | 2.0 | 0.032*60cm | available | / | |
| 16G*30cm | 2.0 | 0.032*70cm | available | / | |
| 18G*13cm | 1.7 | 0.025*50cm | available | pediatric | |
| 18G*16cm | 1.7 | 0.025*50cm | available | pediatric | |
| 18G*20cm | 1.7 | 0.025*50cm | available | pediatric | |
| Double Lumen | 4F*8cm | 1.7 | 0.018*50cm | / | Infant |
| 4F*13cm | 1.7 | 0.018*50cm | / | Infant | |
| 5F*13cm | 2.0 | 0.021*50cm | / | pediatric | |
| 5F*16cm | 2.0 | 0.021*50cm | / | pediatric | |
| 7F*16cm | 2.7 | 0.035*50cm | available | / | |
| 7F*20cm | 2.7 | 0.035*50cm | available | / | |
| 7F*30cm | 2.7 | 0.035*50cm | available | / | |
| Triple Lumen | 4.5F*10cm | 1.7 | 0.021*50cm | / | pediatric |
| 4.5F*13cm | 1.7 | 0.021*50cm | / | pediatric | |
| 5F*10cm | 2.0 | 0.021*50cm | / | pediatric | |
| 5F*13cm | 2.0 | 0.021*50cm | / | pediatric | |
| 5.5F*13cm | 2.0 | 0.021*50cm | / | / | |
| 5.5F*16cm | 2.0 | 0.021*50cm | / | / | |
| 7F*16cm | 2.7 | 0.035*50cm | available | / | |
| 7F*20cm | 2.7 | 0.035*50cm | available | / | |
| 7F*30cm | 2.7 | 0.035*50cm | available | / |
The factory of Fushan Medical covers an area of 13,000 sqms. Both class 10,000 and class 100,000 clean workshops are designed and constructed according to GMP standards. With various precise manufacture and inspection facilities, Fushan provides different kinds of medical devices by siliconey polyurethanel (PU) and polyvinyl chloride(PVC).
Meanwhile, Fushan designed and built professionallabs for sterile, physicochemical and electrical tests.lt also equipped with CE verified ETO sterilization chamber.
Sterilization verification report can be issued asrequest.
1: Q: What kind certificate you have?
A: We are a professional manufacturer and we have CE, ISO, SGS and other certificate for your market.
2: Q: Where is your factory located? How can I visit there?
A: Our factory is located in Lin'an District, Hangzhou City, Zhejiang Province, China.
It's takes 3 hours from Shanghai airport and 1.5 hours from Hangzhou East Railway Station. We can pick you up if you need, welcome to visit our factory.
3: Q: What is the normal package of your products?
A: Usually our package is blank paper-plastic bag. OEM package is available.
4: Q: Can you make samples?
A: If you need some samples, you can contact with us. We can provide sample productions and delivery services.
5. Q: How does your factory do as quality control?
A: We believe the quality to win credibility, reputation to benefit so there are inspectors in different post and we have material inspection, process inspection, and full inspection before shipment to ensure excellent quality.
6. Q: How do you send the goods to us?
A: For big volume, we can deliver by sea or air; For small volume, we can send by express.
7. Q: How can I get a price of needed product?
A: You can give us your exactly specs details and we can give you a sample and price according to your specification or you can send us a sample and we can give you a counter sample and price according to your sample .
8. Q: Can you make OEM service?
A: Yes. We can provide OEM&ODM service.
9. Q: I am a small wholesaler,do you accept small order?
A: We can accept small order or trial order as long as it meets our MOQ and we would like to grow up with you together.
10. Q: What about the leading time for the mass production?
A: Our leading time is depends on the order quantity and the season you place the order, usually in 30-45 days.
