Audited Supplier
Stripper Guide Pins/ Guide Posts and Bushings for Die Sets
Pillar/Ball Pillar/Outer Pillar/Loading Pillar/Inner Pillar/Cross Pillar/T Pillar for Pillar/Mold Frame
MISUMI standard:The following models are in stock:
SGOH/SGPH/SGPR/SGOR/SGPW
RBSH/RMSH/RKSH/QBSH/QMSH/QKSH/RB/RM/RK/QB/QM/QK/PBSH/PMSH/PKSH/GBSH/GMSH/PB/PM/PK/GB/GM/GK
Standard: MISUMI .DME, HASCO, PUNCH,IEM,DANLY, Lmina , FIBRO PUNCHES. DAYTON. DIN and customers drawings
Product details
Place of Origin: Guangdong China (Mainland) | Brand Name: QY | Model Number: |
Shaping Mode: Punching Mold | Product Material: tungsten steel | Product: Vehicle Mould |
Standard mould component: For vehicle mould | Material: HSS M2, SKH9, SKD11,ASP23,ASP30etc | Standard: JIS,DIN,AISI |
Hardness: 60HRC-62HRC | Grinding precision: 0.001mm | Edm precision: 0.002mm |
Surface roughness: RA0.4 | Verticality: 0.002mm |
[Company introduction]
Dongguan Jichun Mould Standard Parts Co., Ltd. was founded in 1997. 3 factories, 5 warehouses, 95 precision processing equipment, millions of product inventory.
The factory is located in Dongguan, Guangdong Province, China. At present, it specializes in producing various stamping die parts, plastic die parts, automotive die parts, FA automation parts, various kinds of mechanical parts.
[Main Products]
Guide Pins,Guide bush,Stripper Guide Pin,Stripper Guide bush,Holder Guide Post Sets,Ball Guide Post Sets For Die Sets,Plain Guide Post Sets For Die Sets,Guide Posts For Die Sets,Oil-Free Slide Plates,Punches & Dies,Punches,Punch Guide Bushings,Retainers,Coil Springs,Gas Springs At the same time, we can manufacture according to the following criteria: Hasco / Misumi / DME / Pedrotti / Voest / Strack / Fibro / DIN / DAYTON / PUNCH / DANLY / Lmina
Different packaging methods are used for different products in order to ensure the safety of the products during transportation.
