Audited Supplier
carbon steel
Carbon Steel Bar
AISI, ASTM, DIN, JIS, GB, BS
Stainless Steel Scrap
Forged
Bar
Polished
High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel
Die Steel Bar
Smooth
N/M
6-400mm
China
7228400000
Product Description
S355MC Steel | 1.0976 Material Properties & Equivalent
S355MC Steel - 1.0976 Material
S355MC steel (material 1.0976) is a thermomechanically rolled steel with high yield strength. It is essentially a subdivision grade of S355 steel. S355MC has a minimum yield strength of 355MPa and a tensile strength of 430-550 MPa.Meaning/Designation
S355MC meaning: S for Structural steel, 355 indicates the minimum yield strength in MPa, M is for Thermomechanically rolled, C is for cold forming.S355MC Steel Properties
The basic properties of S355MC material are listed in the following data sheet, including chemical composition and mechanical properties.Chemical Composition
Chemical composition based on ladle analysis.| Chemical Composition, % ≤ | ||||||||||
| Standard | Steel (Material Number) | C | Si | Mn | P | S | Al,≥ | Nb | V | Ti |
| EN 10149-2 | S315MC (1.0972) | 0.12 | 0.5 | 1.50 | 0.025 | 0.02 | 0.015 | 0.09 | 0.2 | 0.15 |
- The sum of Nb, V and Ti shall be ≤ 0.22%.
- Sulfur (S) content shall be ≤ 0.010% by agreement.
Mechanical Properties
S355MC mechanical properties at room temperature are listed in the datasheet below, including tensile strength, yield strength, elongation, and bending properties, etc.| Mechanical Properties | |||||
| Steel Grade (Material Number) | Yield Strength, Mpa (ksi), ≥ | Tensile Strength, Mpa (ksi), ≥ | Elongation at fracture A, ≥ | Bending at 180°, minimum mandrel diameter | |
| S315MC (1.0972) | 355 (51) | 430-550 (62-80) | 19 (t< 3), Lo = 80 mm | 23 (t≥ 3), Lo = 5.65 √So | 0.5t |
- Tensile test values apply to longitudinal specimens.
- Bend test values apply to transverse test pieces.
- t = Thickness
| Minimum recommended inside bend radii for cold forming | |||
| Steel (Number) | t ≤ 3 | 3< t ≤6 | t > 6 |
| S315MC (1.0972) | 0.25t | 0.5t | 1.0t |
S355MC Equivalent Material
S355MC steel equivalent ASTM, European, ISO, Australian, Canadian, Chinese and Indian standard are listed in the table below.| S315MC Steel Equivalent Material | |||||||||||||
| European Union | US | ISO | China | Australia | Canada | Indian | |||||||
| Standard | Grade (Material Number) | Standard & Grade | Grade | Standard | Grade | Standard | Grade | Standard | Grade | Standard | Grade | Standard | Grade |
| EN 10149-2 | S315MC (1.0972) | ASTM A1066/A1066M | A1066 Grade 50 [345] | ISO 6930-1 | FeE 355 | GB/T 1591 | Q355ME | ||||||
Related materials: S355J2, S355JR, S235JR
