MadeInChina.com > Chemicals > Plastic & Polymer > Plastic Materials
 
 

China Manufacturer IV 0.8 Water Bottle Grade 100% Virgin Pet Resin Price

Price $1130.00 Compare
Min Order 22 Tons
Availability In Stock
Shipping From Hebei, China
Popularity 377 people viewed
Quantity
+-
 

Hebei Changsheng Plastic Industry Co., Ltd.

VIP   Audited Supplier 2 years
Profile Certified by SGS/BV
Visit Homepage Product Catalog
Pet Resin
Engineering Plastics
25038-59-9
C8h6o4.C2h6o2
25038-59-9
Polyethylene Terephthalate/PET
General Plastics, Engineering Plastics, Specialty Plastics
Thermoplastic Plastics
Blow Molding
White
Bottle Grade
0.8+
Fibers,Bottles
1100kg/Bag
Jade
Bag
cz-302, cz-318, cz328
Jiangsu
3907619000
Product Description
PET material, commonly known as polyester resin, is the most important variety of thermoplastic polyester. Its physical properties are milky white or light yellow highly crystalline polymer with smooth and shiny surface. Creep resistance, fatigue resistance, abrasion resistance, low wear and high hardness, with the greatest toughness among thermoplastics.
Packing: 1100kg/bag 22tons/container

Features:
1. Good electrical insulation performance, less affected by temperature, but poor corona resistance.
2. Non-toxic, weather resistance, good stability against chemicals, low water absorption, resistant to weak acids and organic solvents, but not resistant to hot water soaking, not alkali resistant.
3. The glass transition temperature of PET resin is high, the crystallization speed is slow, the molding cycle is long, the molding cycle is long, the molding shrinkage rate is large, the dimensional stability is poor, the crystallized molding is brittle, and the heat resistance is low.
4. The heat distortion temperature and long-term use temperature are very high among thermoplastic general engineering plastics.
5. Because of the high heat resistance, the reinforced PET is immersed in a solder bath at 250°C for 10 seconds, and it hardly deforms and does not change color. It is especially suitable for the preparation of electronic and electrical parts for soldering.
6. The bending strength is 200MPa, the modulus of elasticity reaches 4000MPa, the creep resistance and fatigue resistance are also very good, the surface hardness is high, and the mechanical properties are similar to thermosetting plastics.
Application
Application:
1. PET is mainly used for fibers, and a small amount is used for films and engineering plastics.
2. Another use of PET is blow molding products, which are used in various bottles, such as water bottles, carbonated beverage bottles, and oil bottles.

 
ItemCZ-302CZ-318CZ-328
Viscosity IV(dl/g)0.8030.8030.88
Diethylene glycol content
DEG(%)		1.451.441.43
Terminal hydroxyl content
-COOH(mmol/kg)		272125
Melting Point(ºC)244.7243.6244.7
Moisture(%)0.10.10.1
Density(g/cm³)1.401.401.40
Weight/100PCS(g)1.531.501.54
 

  • Contact Supplier
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA  
$760.00 17 Tons(MOQ)

Best Price Polyvinyl Chloride Pipe Grade Sg5 K 65-67 PVC Powder Resin

Hebei Changsheng Plastic Industry Co., Ltd.
$1150.00 1 Ton(MOQ)

2024 Chinese General Plastics Polypropylene 100% Virgin Natural PP Random PP Resin for Film

Hebei Changsheng Plastic Industry Co., Ltd.
$2000.00 1 Ton(MOQ)

High Quality Transparent Ethylene Vinyl Acetate Copolymer EVA Granules for Shoe Sole

Hebei Changsheng Plastic Industry Co., Ltd.
$1208.00 1 Ton(MOQ)

White Granules Extrusion and 2-12 Mfi PP Resin

Hebei Changsheng Plastic Industry Co., Ltd.
$2500.00 18 Tons(MOQ)

LG ABS Xr404 Plastic Raw Particles with High Heat Resistance

ZHENJIANG HONESTAR INTERNATIONAL TRADE CO., LIMITED
$2.30 300 kg(MOQ)

Premium 3mm Transparent Cast Acrylic PMMA Sheet for Wholesale

Goldensign Industry Co., Ltd.
$1420.00 1 Ton(MOQ)

Biomass Plastic Rice Husk Fiber Mix up with PP PE Material for Injection Molding Environmental Friendly

Weifang Yunding Holding Group Co., Ltd
$4100.00 19 Tons(MOQ)

Injection Molding Grade Lupoy HP5004A PC/ABS Plastic with High Impact at Low Temperature, High Flow and Heat Resistance Flame Retardant PC/ABS Resin Fr

ZHENJIANG HONESTAR INTERNATIONAL TRADE CO., LIMITED
$1149.00 1 Ton(MOQ)

LLDPE Blowing Film Grade High Strength Film Grade Linear Low Density Plastic Raw Material

Zhongcheng Chemical (Shandong) Co., Ltd.
$1300.00 1 Ton(MOQ)

Eco-Friendly Non-Toxic Good Quality Plasticizer Dotp National Standards for Cable Granules

Qingdao Kejunsheng New Material Co., Ltd.
MadeInChina.com 86-025-66775089 Monday to Friday 09:00-18:00 Email: [email protected]
Source on MadeInChina
Request for Quotation
Search Products
Find Suppliers
Join Free
Customer Services
Terms of Use
Privacy Policy
Payment and Security
Submit a Complaint
About us
About MadeInChina
Contact Us
Feedback

Scan on mobile

Scan the QR code of madeinchina.com touch screen site