Audited Supplier
Z41H
Direct-acting
Cast Iron
Flange
Low Pressure
Manual
Wedge Gate Valve
Inside Gate Valve
Flow Control
DIN
Industrial Usage, Water Industrial Usage
Dn50-Dn600
TFW
Plywood Case
CE, ISO9001: 2008
Tianjin China
84818040
Product Description
Rising Stem Metal Seal Gate Valve
1) Product information: The gate valves supplied are mainly used for adjusting water, Steam, oil, gas, and natural gas in chemical industries
2) Standards: AWWA C509, DIN3352 F4/F5, BS5163, BS5150
3) Connection type: Flanged type
4) Material:
A) Body: Cast iron, ductile iron
B) Wedge: Ductile Iron, Cast iron
C) Wedge nut: Brass
D) Stem: Stainless steel, Brass
E) Gasket: NBR
F) Bonnet: Ductile iron
G) O-ring: NBR
H) Washer: Carbon steel or stainless steel
I)Sealing Ring: Cast bronze
5) Size: 50-600mm/2" - 24"
6) Pressure rate: PN10, PN16
7) Coating:
A) Fusion-bonded epoxy 200-250 microns inside and outside
B) Coating as per customers' requirement
1) Product information: The gate valves supplied are mainly used for adjusting water, Steam, oil, gas, and natural gas in chemical industries
2) Standards: AWWA C509, DIN3352 F4/F5, BS5163, BS5150
3) Connection type: Flanged type
4) Material:
A) Body: Cast iron, ductile iron
B) Wedge: Ductile Iron, Cast iron
C) Wedge nut: Brass
D) Stem: Stainless steel, Brass
E) Gasket: NBR
F) Bonnet: Ductile iron
G) O-ring: NBR
H) Washer: Carbon steel or stainless steel
I)Sealing Ring: Cast bronze
5) Size: 50-600mm/2" - 24"
6) Pressure rate: PN10, PN16
7) Coating:
A) Fusion-bonded epoxy 200-250 microns inside and outside
B) Coating as per customers' requirement
| Nominal pressure | 1.6Mpa |
| Seat test pressure | 1.6Mpa |
| Shell Test Pressure | 2.4Mpa |
| Suitable Temperature | ≤230C |
| Suitable Media | water,Oil,gas |
