China Opgw Insulated Suspension Clamp

Price $10.00 Compare
Min Order 100 Pieces
Availability In Stock
Shipping From Jiangsu, China
Popularity 620 people viewed
Quantity
+-
 

Jiangsu Chuandu Electrical Technology Co., Ltd.

VIP   Audited Supplier 8 years
Profile Certified by SGS/BV
  • Jiangsu, China
  • Rick (Mr.)  
    Sales Director
Substation Fittings, Line Fittings
Suspension Clamps
Silver
Accept
Aluminum Alloy
Not Less Than 6.8 Grade
Free
Hot-DIP Galvanized
ISO 1461-2009
Smooth
12 Months
Da Sheng
Wooden Case
Two U bolts
Yangzhou City, China
8535900090
Product Description
China OPGW Insulated Suspension Clamp
Reasons for Abrasion of Suspension Clamp
The abrasion of suspension clamp is mainly caused by continuous swing of body,which is affected by wind power,wind direction and topography.The wind action on the overhead line causes the unbalance of the force on both sides of the overhead line wire clamp, which causes the swing of the suspension clamp and the rotation of the suspension clamp body.In addition,wind characteristics and parameters, terrain, line direction, vertical pitch and other factors can affect the abrasion of the suspension clamp.

Measures for Abrasion of Suspension Clamp
1.From the point of view of design, it is necessary to avoid small vertical distance and large height difference when arranging the tower, that is, pay special attention to the tower in the valley and the tower with large span;
2.When a suspension point of the overhead line is supported by two clamps, the clamps will not shake back and forth and move along the line due to the uneven force at both ends, which increases the safety factor of the line;
3.Adopt wear-resistant fitting series products, these wear-resistant power fittings mainly increases the size of the rough shape to extend the service life, at the same time adopt spraying technology to improve the corrosion resistance of the power fittings.
>>------------------------------------------------------------------




>>------------------------------------------------------------------
























  • Contact Supplier
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA  
$3.00 100 Pieces(MOQ)

Electric Power Fitting Overhead Transmission Line Power Line Fitting

Jiangsu Chuandu Electrical Technology Co., Ltd.
$10.00 100 Pieces(MOQ)

Compression Dead End Clamp

Jiangsu Chuandu Electrical Technology Co., Ltd.
$5.00 100 Pieces(MOQ)

Pole Line Hardware Hot-DIP Galvanized Guy Dead End Hook

Jiangsu Chuandu Electrical Technology Co., Ltd.
$5.00 100 Pieces(MOQ)

Preformed Helical Grip Suspension Clamp for ADSS/Opgw

Jiangsu Chuandu Electrical Technology Co., Ltd.
$3.00 1000 Pieces(MOQ)

Anchor Rod Thimble Rod Power Fittings

Hebei Sali Electric Equipment Manufacturing Co., Ltd
$18.00 1 Piece(MOQ)

Aluminum Alloy Strain Tension Anchor Clamp of Insulation for Gun Suspension Clamp

Hebei Leicheng Power Technology Co., Ltd.
$150.00 1000 Pieces(MOQ)

3 Phases or 4 Phases High Voltage Temporary Short Circuit Earthing Sets

Beijing Winner Electric Power Energy Co., Ltd
$5.00 100 Pieces(MOQ)

Power Line Hardware Steel Channel Cross Arm

Jiangsu Chuandu Electrical Technology Co., Ltd.
$3.00 100 Pieces(MOQ)

HDG Steel Forged Eye Clevis

Nanjing Honghe Precision Forging Co., Ltd.
$10.00 100 Pieces(MOQ)

China Shielding Grading Corona Ring

Jiangsu Chuandu Electrical Technology Co., Ltd.