Audited Supplier
The Times super group ac servo motor selects high working temperature, high magnetic energy and high quality permanent magnet materials. The effective element method is used to optimize the electromagnetic parameter design. It is driven by sinusoidal current and has good operation performance. It is widely used in spark machine, manipulator and precise machine. Can add speed reducer, lead mechanical equipment to bring reliable accuracy and high torque. Good speed control, highest output power per unit weight and volume. The torque fluctuation of multistage structure is small, and the power can be done from 100W to 10KW.
3m cable with the motor in free charge
| Model no. | Rated Voltage(V) | Output Power(w) | Rated Torque(N.m) | Rated Speed(RPM) | Encoder (Increment) PPR | Motor Length(mm) | Shaft DIA(mm) | Matched Driver |
| 110AEA12020-SH3 | 220 | 1200 | 6 | 2000 | 2500 | 219 | 19 | DM-12EA |
| 110AEA12030-SH3 | 220 | 1200 | 4 | 3000 | 2500 | 189 | 19 | DM-26EA |
| 110AEA15030-SH3 | 220 | 1500 | 5 | 3000 | 2500 | 204 | 19 | DM-26EA |
| 110AEA18030-SH3 | 220 | 1800 | 6 | 3000 | 2500 | 219 | 19 | DM-26EA |
Size of Motor:
Size of Driver:
The front panel:
The function of AC servo motor driver.
| The input power | Single phase or three phase AC220V -15~+10% 50/60Hz | |
| environment | temperature | Using: 0~55 Storage: -20~80 |
| humidity | Below 90% RH No dewing | |
| vibration | Belown0.5G(4.9m/S2),10-60 no continue running | |
Installation environment conditions
1.Working environment: 0 ~ and ;working environment: less than 80% (no condensation)
2.Storage environment temperature:- ; Storage environment humidity: 80% of the (no condensation)
3.Vibration: Below 0.5 G
4.Well ventilated, less moisture and dust place
5.No corrosive, flash gas, oil and gas, cuttingfluid, iron powder and so on environment
6.No moisture and direct sunlight place
Installation method
1.Level installation:to avoid liquids such as water, oil from motor wire end into the motor internal, please will cable outlet inbelow
2.Vertical installation: if the motor shaft and the installation with reduction unit, must pay attention to and prevent reducer in mark through the motor shaft into the motor internal
3.The motor shaft out quantitymust be thoroughly, if insufficient out to motor sports generates vibration
4.Installation and remove the motor, please do not use hammer knock motor, otherwise easy to cause damage to themotor shaft and encoder
The motor direction of rotation
Looking from the motor load on the motor shaft and counterclockwise (CCW) for the forward, clockwise (the CW) as the reverse
