Audited Supplier
CX1500D
Whole Life Use
Two Years
Heat Pressure Vessel
Composite Material Processing
Q345r
0.1MPa≤p<1.6MPa
Carbon Fiber
Medium Pressure (1.6MPa≤p<10.0MPa)
New
Automatic Control by Hydraulic
Inflatable Silicone Seal
Both Automatic Control and Manual,Simens Brand
Completely Follow Ce and ISO9001:2008
Automatic Alarm for Ultrahigh Pressure & Automati
Less Than 0.01 MPa
Electric
CX
Safety Packing
CE, ISO9001: 2008
China
8477800000
Product Description
Model No.: CX1500D
Name : Autoclave,autoclave for composite material ,autoclave for carbon fiber products.
Usage : The autoclave is designed for Polymer matrix composite component products Molding.
The technology is "use vacuum bag to seal black composite material,honeycomb sandwich
Structure,or bonded structure on the mould.
Then place it into the autoclave. In the condition of vacuum (or antivacuum),during temperature increasing, pressure increaseing, heat preservation (Medium temperature or high temperature), pressure maintaining, temperature and pressure relief, then finally gain the quality products.
FEATURES
1-Heating method : electric heating
2-Door open and close system :
Hydraulic automatic control.
3-Seal system :
Inflatable silicon rubber seal. Automatic inflate during working.
4-Safety interlocking for the door
We design three sets safety locking system to avoide the damage for the worker 's faulty operation.
First is pressure automatic safety locking system:
Second is manual safety locking system
Third is seals safety locking system
5-Temperature and pressure ,time control system : SIMENS PLC + Computer control
Pressure control range: 0- 0.01Mpa/min,adjustable
6- Vaccum system:
Vacuumize channel : according to requests, separated control.
Vacuum bag vacuum degree : HUB sensor from Switzerland.
Vacuum : ≤ -0.15 bar as your requests.
7- Insulation method :
We design 1.2mm cold-rolled sheet to fix the machine,and inside 60mm glass cotton to cover the machine. This will save costs for heating .
Parameters below :
Service of us :
The production of all products are follow ISO9001:2008 organization system, from raw material processing to assembe and finally test running. even the packing, and delivery. Also we track the use of machine,installation, products producing technical ect.
All we do is for longterm cooperation , " CREATE TURST" !
Name : Autoclave,autoclave for composite material ,autoclave for carbon fiber products.
Usage : The autoclave is designed for Polymer matrix composite component products Molding.
The technology is "use vacuum bag to seal black composite material,honeycomb sandwich
Structure,or bonded structure on the mould.
Then place it into the autoclave. In the condition of vacuum (or antivacuum),during temperature increasing, pressure increaseing, heat preservation (Medium temperature or high temperature), pressure maintaining, temperature and pressure relief, then finally gain the quality products.
FEATURES
1-Heating method : electric heating
2-Door open and close system :
Hydraulic automatic control.
3-Seal system :
Inflatable silicon rubber seal. Automatic inflate during working.
4-Safety interlocking for the door
We design three sets safety locking system to avoide the damage for the worker 's faulty operation.
First is pressure automatic safety locking system:
Second is manual safety locking system
Third is seals safety locking system
5-Temperature and pressure ,time control system : SIMENS PLC + Computer control
Pressure control range: 0- 0.01Mpa/min,adjustable
6- Vaccum system:
Vacuumize channel : according to requests, separated control.
Vacuum bag vacuum degree : HUB sensor from Switzerland.
Vacuum : ≤ -0.15 bar as your requests.
7- Insulation method :
We design 1.2mm cold-rolled sheet to fix the machine,and inside 60mm glass cotton to cover the machine. This will save costs for heating .
Parameters below :
| Item | 800 | 1200 | 1500 | 1700 | 2000 | 2600 |
| Inner diameter(mm) | 800 | 1200 | 1500 | 1700 | 2000 | 2600 |
| Canister length(mm) | 22000 | 3000 | 3000 | 4000 | 5000 | 10000 |
| Number of lid sawtooth | 12 | 12 | 14 | 14 | 16 | 24 |
| thickness of lid (mm) | 10 | 10 | 10 | 10 | 16 | 14 |
| Thickness of the tank body(mm) | 10 | 10 | 10 | 10 | 12 | 14 |
| Working pressure(Mpa) | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.55 |
| Dimensions(mm) (length*width*height) | 22766*1445 *1170 | 4010*1575 *1670 | 3960*2150 *2050 | 4925*2162 *2070 | 6200*2590 *2424 | 11722*3360 *4136 |
| Weight(Kg) | 5580 | 2017 | 2950 | 3835 | 6500 | 16775 |
Service of us :
The production of all products are follow ISO9001:2008 organization system, from raw material processing to assembe and finally test running. even the packing, and delivery. Also we track the use of machine,installation, products producing technical ect.
All we do is for longterm cooperation , " CREATE TURST" !
