Audited Supplier
1.5t/ton 1500kg Full electric hydraulic standing electric stacker with free lifting
| CDDK15-III Main Configuration | 1.24V AC POWER |
| 2.CURTIS CONTROLLER | |
| 3.RUYI TILLER | |
| 4.24V200AH LEAD-ACID BATTERY | |
| 5.24V30A CHARGER |
| Options | Straddle leg |
| EPS---CDDK15-III | |
| 24V210AH Battery---CDDK15-III | |
| 24V240AH Battery---CDDK15-III | |
| Lithium Battery 24V125AH---CDDK15-III Lithium Charger 24V50A |
| Model | CDDK10-III | CDDK12-III | CDDK15-III | |
| Load capacity/rated load | Q(kg) | 1000 | 1200 | 1500 |
| Load center distance | c(mm) | 500 | 500 | 600 |
| Load distance,centre of drive axie to fork | x(mm) | 600 | 600 | 697 |
| Fork height,lowered | h13(mm) | 90 | 90 | 90 |
| Tyre size,front | mm | Dia250x70 | ||
| Tyre size,rear | mm | Dia80x70 | ||
| Additional Wheels(dimensions) | mm | Dia150x60 | ||
| Wheel,number front rear(x=driven wheels) | 1X+2/4 | |||
| Height,mast lowered | h1(mm) | 2087/1837/2087/2237 | ||
| Max.lift height | h3(mm) | 1600/2500/3000/3300 | ||
| Height,mast extended | h4(mm) | 2087/3087/3587/3887 | ||
| Height of tiller in drive position min./max. | h14(mm) | 1150/1450 | ||
| Overall length | I1(mm) | 1955 | 2025 | |
| Length to face of forks | I2(mm) | 840 | 920 | |
| Overall width | b1(mm) | 850 | ||
| Fork dimensions | s/e/l(mm) | 60/170/1070(1150) | ||
| Width overall forks | b5(mm) | 570/695 | ||
| Aisle width for pallets 800x1200lengthways | Ast(mm) | 2440 | 2520 | |
| Turning radius | Wa(mm) | 1575 | 1655 | |
| Travel speed,laden/unladen | Km/h | 7/7.1 | ||
| Lift speed,laden/unladen | m/s | 0.11/0.17 | 0.10/0.16 | 0.09/0.16 |
| Lowering speed,laden/unladen | m/s | 0.15/0.16 | ||
| Battery voltage,nominal capacity K5(Duplex Mast) | V/Ah | 24/120 | 24/200 | |
| Battery weight | Kg | 90 | 160 | |
| Battery dimensions l/w/h | mm | 753x178x240 | 800x254x320 | |
| Service weight(with battery) | Kg | 700/750/780/800 | 800/850/870/890 | 840/920/930/945 |
Advantage:
SAFETY AND PRODUCTIVITY
- AC motor eliminates carbon brush replacement.
- Multi-function display with BDI and hour meter.
- Side way battery is easy to maintain.
- Damping cushion for low-noise operation.
- Emergency reversing device equipped handle to keep safe.
- Auto deceleration function makes operation more safely.
- Built-in pressure relief valve protects the trucks from overloads,increase the reliability.
- With brake in handle upright and horizontal position.increasing the safety of the truck .
- Emergency power disconnect switch .
- Turtle-shaped low speed switch .
- Stepless speed control .
OPTIMUM STRUCTURAL DESIGN
- Low barycenter ensures the stable operation.
- Vertical driving wheel ensures convenient maintenance and small turning radius,water-proof and dust-proof motor structure ,keeps the braking and motor more durable and reliable.
- The mast and the frame are dividable and exchangeable.
- Full free lifting,fit for low roof house.(3M lift height truck can enter into a 2M door)
SERVICEABILITY
- Low voltage protection setting prolongs the battery life time.
- The electronic components concentrated design simplifies the circuit and makes easily assemble,debug and maintain.
| CDDR15 1.5ton with 1600-3000mm lifting height, DC motor ,CURTIS controller |
| CDDK20 2.0ton with 25000-5600mm lifting height , 24V AC power,CURTIS controller,24V300Ah lead-acid battery |
| CDDR15-III FULL-ELECTRIC 1.5ton with 1600-5600mm lifting height. 24V200AH LEAD-ACID BATTERY .24V30A CHARGER |
Packing and Delivery
MOVMES according to the delivery requirements of each customer, we carefully package each TRUCK. Before delivery, we will take photos and videos, and only after getting the customer's approval will we send them away.
Usually MOVMES producing time is 30-45 days after we receive the advanced 30% payment.
High praise from customerCE CertificationISO9002:1995
ISO9001:2008(Quality management system)
ISO14001:2004(Environmental management system)
OHSAS18001:2007(Occupational Health and Safety management system)
We got TUV/GS/CE certificate for hand pallet truck early in 1991,who was the first manufacture in China.For material handling equipment of Manual Lift Trucks and Electric Lifting Trucks,up to 90% products have approved CE certificate from TUV,our products have approved CE standards of ISO3691-1 EN1175-1 EN16307-1
36 year's experience
Q1: How about the continuous working time for the electric truck series ? And How long time to charge the battery full ?
A1: MOVMES battery continuous working time is around 3-6 hours (working time depend on battery volume).It needs usually 3--6 hours to charge the battery.
Q2: What's the specification of the chargers of CDDK15-III?
A2: Our chargers 24V200Ah Lead-acid battery. Power plug could be USA/UK/AUSTRALIA/EUPROPEAN standard.
Q3: Can MOVMES provide customized products? OEM or ODM products?
A3: Yes, Since 1985,Our factory is always professionally in developing and producing warehouse logistic equipment ,such as hand/electric pallet trucks,manual /electric slackers, reach trucks, forklifts and so on.We do OEM for Toyota/ Jungheinrich/ Clark / Hyster / Yale etc.
Q4: How long is the Warranty for MOVMES product?
A4: MOVMES provides one year warranty.During the warranty period we provide wearing parts for free which are damaged by non-human.
Under the current international environment, the electric industry will definitely develop vigorously. As a the new brand in the warehousing and logistics industry, MOVMES has the strength factory and high-end products as the main support power. Now we are looking for agents all over the world to expand our brand In the market, please give us a chance to cooperate, you will get the same quality products as the world's famous brands.
