Audited Supplier
WZ30-25
ISO, CE
New
2.5t
Hydraulic
Front Discharge
Wheeled
Medium-sized Loader
2km/H
1.0m3
2500kg
3400(mm)
38kn
0.1-0.4m3
3878(mm)
4080~4500(mm)
5688(mm)
75kw(100HP)
Yuchai Yc4a105z-T20
Fixed Shaft Power Shift Transmission
16/70-20
LTMG
Nuck Packing
5910X 2268 X 3760(mm)
China
842951000
Product Description
Chinese Machinery 4WD wz30-25 Backhoe Loader Tractors 2.5 Ton Mini Loader Backhoe
| WZ30-25 Dimension technological parameters | ||
| Overall Dimension | Length X Width X Height | 5910X 2268 X 3760(mm) |
| Wheel base | 2250(mm) | |
| Track | 1640(mm) | |
| Min. ground clearance | 300(mm) | |
| Main Technical Specification | system pressure | |
| load hydraulic system | 18Mpa | |
| dig hydraulic system | 20Mpa | |
| steering hydraulic system | 12Mpa | |
| system flow | 120L/min | |
| four-wheel drive,whole hydraulic system | ||
| total operating weight | 7600kg | |
| maximum speed | 22Km/h | |
| maximum gradient capacity | 30° | |
| loading bucket capacity | 1.0m3 | |
| rated loading | 2500kg | |
| maximum articulated height of bucket | 3400(mm) | |
| bucket discharge height | 2795(mm) | |
| bucket discharge distance | 1048(mm) | |
| loading lift capacity | 25KN | |
| bucket hydraulic translation function | yes | |
| bucket lift time | 6.8s | |
| bucket lower time | 2.5s | |
| bucket discharge time | 1.2s | |
| maximum tractive force | 39KN | |
| maximum breakout force | 38KN | |
| backacter bucket capacity | 0.1-0.4m3 | |
| backacter discharge height | 3878(mm) | |
| maximum digging depth | 4080~4500(mm) | |
| maximum digging radius | 5688(mm) | |
| bucket slewing angle | 190° | |
| bucket digging capacity | 46KN | |
| bucket stick digging capacity | 31KN | |
| Diesel engine | model | YUCHAI YC4A105Z-T20 |
| rated power | 75KW(100HP) | |
| rated speed | 2400 r/min | |
| cylinder -internal diameter | 4-102 | |
| maximum torque | 400N.M | |
| minimum fuel consumption | 235 g/kw.h | |
| displacement | 4.3L | |
| Transmission system | model of hydraulic pump | fixed shaft power shift transmission |
| gear shift | 2forward shift 2 reverse shift | |
| torque | YJ-280 | |
| drive pump | CDXaf3016-IL | |
| flow | 16ml/r | |
| work pump | CBGj2063 | |
| flow | 63ml/r | |
| Steering system | type | articulated hydraulic steering |
| model of steering control valve | BZZ5-250 | |
| model of turning control valve | YSF25S-00 | |
| steering angle | 36±1°left or right 36±1° | |
| minimum turning radius | 5018(mm) | |
| Axles | main transmission type | single reduction |
| wheel reduction type | wheel reduction | |
| Wheel | tire size | 16/70-20 |
| front wheel pressure | 0.22Mpa | |
| rear wheel pressure | 0.20Mpa | |
| service braking | air over hydraulic disc on 4 wheels | |
| parking brake | manual parking brake | |
| Refill Capacity | fuel tank | 80L |
| transmission | 25L | |
| front axle | 9KG | |
| rear axle | 9KG | |
| hydraulic tank | 140L | |
Feature:
1. The integral body frame with more stable operating condition, more suitable for digging work;
1. The integral body frame with more stable operating condition, more suitable for digging work;
2. The excavating working structure is side shift type, higher strength, good structural stability;
and the loading end adopt eight -bar linkage mechanism.
and the loading end adopt eight -bar linkage mechanism.
excavator bucket with strengthened and thicker steel.
4. Rear and front body, with small rotary radius,hydraulic steering,comfy and convenient to operate.
heavy duty hinge joint and hydraulic pipe protection
heavy duty hinge joint and hydraulic pipe protection
5. Lifting enlarge operator cabin with secure glass and wide field, comfortable steering wheel, high
quality seat and suitable joystick control
quality seat and suitable joystick control
Detail photo
1. What Certificate do you have?
LTMG workshop meet with the ISO9001:2008 Quality System.
All of our products with CE certificate. Some of our products meets the EPA requirements.
2. Can you customize and design as the clients' requirement?
LTMG will try its best to meet all kinds of clients' special requirements.
However, All the customizing and refit should be implemented safely and scientifically.
The colors can be painted as client's need.
3. How long is the warranty of your products?
Normally 1 year or 2000 working hours whichever occurs first. Details to see the LTMG warranty policy for each model.
4. Can you produce the products labeled with the client's brand?
With the authorization of the brand, we can OEM for our clients.
5. What payment terms do you accept?
Normally 30% T/T in advance as deposit, balance paid before shipment.
100% L/C at sight issued by world famous bank with good faith is also available.
6. Delivery time:
Standard configuration products are always in stock.
The production period of Customizing products is 30 days.
