Audited Supplier
YQB
Available
12 Months
Constant Pump
Oil Pump
Electric
High Pressure
Yqb
Rotary Pump
Single-Stage Pump
High Pressure
Liquefied Petroleum
Transfer Pump Liquefied Gas
Standard
841311000
GOGOGO PUMP
Wooden Case
cast iron
China
8413110000
Product Description
YQB series LPGP of liquefied petroleum gas pumps produced by our company are mainly used for transporting liquefied petroleum gas, propylene, liquid ammonia, or transporting various volatile liquids and petroleum products with similar properties.
The pump is a positive displacement vane pump, its structure is advanced, the stator surface is composed of composite curves, both ends of the mechanical seal, the fixed match end face are using "O" type sealing ring, the rotating movement of the matching parts are metal relative non-metal, with the use of safe and reliable, a multi-purpose function.
The pump type is positive displacement vane pump, the work depends on the centrifugal sliding of the blade, the flow rate is related to the speed of the shaft, the stator internal surface is made of domestic original composite curve, the stator and rotor, baffle, blade composed of ten sealing cavity, because the stator surface is a composite curve, when the rotor rotates, the volume of the inlet cavity gradually increases, and the formation of negative pressure to produce suction, so as to suck the oil. When the rotor is rotated at a certain Angle, the volume section is gradually reduced, so that the oil is hydraulic out, and there is an oil block between the oil suction chamber and the oil pressure chamber.
The blade is closely fitted with the inner surface of the stator by centrifugal force and two-baffle structure, so that the pump can work normally under rated state.
Working Principle: | Positive Displacement type vane pump |
Main applications: | LPG,Propylene,liquid ammonia |
Driver: | Electric motor |
Power Specs: | 115V,220-240V,230/400V,380V-415V,220V/440V,380V/660V,575V 50Hz/60Hz |
Installation position: | Horizontal |
Casing/vane material: | Cast iron/EPGC vane |
Seal | Mechanical seal |
Motor power: | 1.5KW-30KW(2HP-40HP) |
| Temperature | -40~+120ºC |
Maximum discharge-side pressure: | 1.6MPa(16bar) |
Maximum head: | 160m |
Flow rate range: | 1~100m3/h(4.4~440GPM) |
Specification:
| Model | Rotary Speed | Flow Rate | Working Pressure | Pressure Difference | Motor Model | Motor Power | Entrance Diameter | Exit Diameter | Tempreture Range |
| Rpm | m³/h | Mpa | Mpa | KW | mm | ºC | |||
| YQB1-5 | 730 | 1 | 1.6 | 0.5 | YB90L-4 | 1.5 | 25 | 25 | -40~+80 |
| YQB2-5 | 930 | 2 | 1.6 | 0.5 | YB90L-4 | 1.5 | 25 | 25 | -40~+80 |
| YQB5-5 | 1130 | 5 | 1.6 | 0.5 | YB100L-4 | 2.2 | 32 | 32 | -40~+80 |
| YQB10-5 | 600 | 10 | 1.6 | 0.5 | YB132S-4 | 5.5 | 50 | 50 | -40~+80 |
| YQB10-5A | 600 | 10 | 1.6 | 0.4 | YB112L-4 | 4 | 50 | 50 | -40~+80 |
| YQB15-5 | 780 | 15 | 1.6 | 0.5 | YB132S-4 | 5.5 | 50 | 50 | -40~+80 |
| YQB15-5A | 780 | 15 | 1.6 | 0.4 | YB112M-4 | 4 | 50 | 50 | -40~+80 |
| YQB25-5 | 600 | 25 | 1.6 | 0.5 | YB132M-4 | 7.5 | 65 | 65 | -40~+80 |
| YQB35-5 | 780 | 35 | 1.6 | 0.5 | YB160M-4 | 11 | 80 | 80 | -40~+80 |
| YQB50-5 | 551 | 50 | 1.6 | 0.5 | YB160L-4 | 15 | 100 | 100 | -40~+80 |
| YQB60-5 | 600 | 60 | 1.6 | 0.5 | YB180M-4 | 18.5 | 100 | 100 | -40~+80 |
| YQB80-5 | 780 | 80 | 1.6 | 0.5 | YB180M-4 | 22 | 100 | 100 | -40~+80 |
| YQB100-5 | 780 | 100 | 1.6 | 0.5 | YB200L-4 | 30 | 125 | 125 | -40~+80 |
If you are looking for such pumps,welcome to inquiry.
