Audited Supplier
BF580-17
ISO
Vertical
Industrial
Electric Holding Furnace
Ceramic Sintering
Electric
Air and O2
1200*600*800mm(D*W*H)
1 Year
Chitherm
Wooden Packaging
2880*3600*2240mm(D*H*W)
China
8514101000
Product Description
1. Application:
The equipment is widely used in high-temperature sintering processes for advanced ceramics, magnetic materials, electronic ceramic components, and other products.
2. Technical Specification:
- Rated Temp.:1700ºC
- Max Temp.:1750ºC
- Effective Dimensions:1200mm×600mm×800mm(D×W×H)
- Heating Method: U-shaped silicon molybdenum heater
- Thermcouple: Type B
- Temperature Control: 2 Points
- Temp. Set Accuracy: ±1ºC(flat temp. insulation)
- Temp. Control Mode:control module imported from Japan with PID
- Heat-up Rate : ≤3ºC/min
- Temp. Uniformity: ± 5ºC (empty furnace insulation test 2hours under 1700ºC)
- Program Tracking Accuracy: ±2ºC (>600ºC)
- Furnace Surface Temperature ≤ 40ºC
- Maximum Lifting Trip:800mm
- Lifting method: Screw driven lifting system
- Loading Weight ≤ 3000kg (with firing furniture and products)
- Atmosphere Control : two channels of air inlet, each channel of air flow is controlled by the glass rotor flowmeter, single range of 5 ~ 50L / min
- Exhaust System : Two exhaust chimneys are installed at the top for exhaust emissions, and the chimney covers can be automatically opened and closed
- Alarm System : with over-temperature, broken couple, overload, over-range, deviation and other sound and light alarm protection function
- Maximum Heating Power:120kW
- Empty furnace insulation power:≤ 60kW
- External Dimensions: 2880×3600×2240mm(D×W×H) (Excluding tracks and control cabinets)
- Appearance Color: Light gray
| Table 1 Delivery list | |||
| Item | Note | Qty. | |
| Basic Components | Furnace | 1 SET | |
| Inspection Certificates | Certificates of major outsourced components | 1 SET | |
| Technical Documents | Instructions, technical documents of the major outsourced parts, etc | 1 SET | |
| Key Components | Silicon molybdenum rod | U-shaped silicon molybdenum heater | 1 SET |
| Power regulator | 1 SET | ||
| Thermocouple | 1 SET | ||
| temperature controller | Island Electric, Dahua Qianye, Eurofins and other similar brands | 1 SET | |
| PLC | SIEMENS | 1 SET | |
| Touch Screen | 15 cun | 1 SET | |
| Spare Parts | Heating Element | U-shaped silicon molybdenum heater | 1 PC |
4. Equipment Normal Operating Conditions
- Environmental Conditions: temperature: 0~40ºC, humidity≤ 80%RH, no corrosive gas, no strong airflow disturbance;
- Atmosphere Conditions: dry, clean, oil-free compressed air, working pressure of 0.4- 0.8MPa, gas consumption of 10 -30 m3/h;
- Ventilation System: Non contact access user exhaust system, with an exhaust capacity greater than 50 m3/h
- Ground Requirements: horizontal, no obvious vibration, load-bearing> 1000 Kg/m2;
- Power Condition(TBD): capacity > 160kVA, 3-phases 5-lines, voltage 220 / 380V, frequency 50Hz. Fire line: yellow, green, red, Zero line: blue, Ground line: yellow-green;
- Installation Site: 6000mm×4000mm×4000mm(D×W×H), with an installation area greater than 24m2.
