Audited Supplier
1. The whole casting bed of the machine tool is made of resin sand casting, effective treatment, super-audio quenching, stable structure and reliable rigidity.
2. The protection inside the machine tool is the overall movement protection, which is 70% higher than the protection effect in the traditional machine tool. It effectively blocks the iron slag and cutting water and debris from entering the screw guide rail, which better protects the electrical equipment. Not only for machine tools
Maintenance and cleaning work, delaying the service life of the machine
3. The machine control system and the servo are both based on the absolute value of the bus.
4. This machine tool is widely used in hardware, bathroom, home appliance and other industries, and has a wide range of uses.
| Description | unit | CK6146HD | ||
| Travel | Max. Swing Diameter | mm | 400 | |
| Max. Turning Diameter | mm | 300 | ||
| X axis travel | mm | 800 | ||
| Z axis travel | mm | 300 | ||
| bed inclination | spend | 30 | ||
| Spindle | Center height of spindle and tool holder plate | mm | 50 | |
| spindle nose | A2-5 | |||
| Hydraulic chuck | inch | 6 | ||
| spindle bore diameter | mm | 56 | ||
| Through bar diameter | mm | 46 | ||
| Spindle speed | r/min | 20-4000 | ||
| Spindle motor power | kw | 5.5 | ||
| C-axis indexing function | spend | 360°(0.01°) | ||
| Axial and drive | Motor Power | x | kw | 1.3 |
| z | kw | 1.3 | ||
| Fast movement speed | x | m/min | 30 | |
| z | m/min | 30 | ||
| guide | x | mm | MSR25*700 | |
| z | mm | MSR30*620 | ||
| lead screw | x | mm | R32*718 | |
| z | mm | R32*591 | ||
| Repeatability | x | mm | ±0.0025 | |
| z | mm | ±0.0025 | ||
| c | spend | 0.01° | ||
| Other | Lubrication pump | capacity | L | 1.5 |
| power | kw | 0.03 | ||
| hydraulic station | capacity | L | 36 | |
| power | kw | 0.75 | ||
| coolant | capacity | L | 40 | |
| power | kw | 0.15 | ||
| Height of spindle center from ground | mm | 1100 | ||
| Machine size(L*W*H) | mm | 2000*1600*1800 | ||
| Total machine power | kw | 8.5 | ||
| Total machine weight | T | 3 | ||
