Audited Supplier
CKS61100D/25D/40D
Metal
Metal-Cutting CNC Machine Tools
Contour Control
Semi-Closed Loop Control
CNC/MNC
Economical CNC Machine Tools
ISO 9001
New
Economic CNC Lathe
precion
Wooden Box
Dezhou, Shandong, Pr. China
Product Description
CKS611--D SERIES HORIZONTAL CNC LATHE
The CKS611--D series is large type horizontal CNC lathe, which adopt Bei Jing KND1000T system or SIMENS808D System. The main transmission have manual 24 level speed, it can be controlled by two axis linkage. The x axis transversal movement has been realized by ball screw and Ac servo motor, and the Z axis longitudinal movement has been realized by the Taiwan rack with AC servo motor and reducer, half closed loop control. So it has the very good positioning accuracy and repeat positioning precision.
Machine tool bed surface is flat - V structure, which uses the high strength resin sand casting, and bed surface has been treated by middle frequency quenching treatment, which hardness is not less than HRC50, and hardening depth is deeper, so that it is benefit for secondary grinding machine tool.
The max feature of Machine tool bed is that it has strong rigidity, large bearing capacity, good stability. The carriage adopt gluing gum craft, and it has small dynamic and static coefficient of friction due to lubrication material, so it reduced the coefficient of friction between the carriage and bed so as to prevent crawing. And we design the lathe bed with arched door for back removing chips, and chips will be directly removed into oil plate, so it is easy to clean chip.
Accuracy :
turning cylinder roundness 0.01
processing consistency(in 300mm length) 0.04
turning flatness (in Φ300mm) 0.025 only concave
CNC controller
1.KND1000Tor SIEMENS 808D CNC system 2.Control axis X,Z two axis
3.Line,circular arc compensate with pitch compensation function. 4.With Usb interfact, it can realize the process and data storage each other. 5.with operational interface, liquid crystal display .Diameter or radius programming.
The tool with machine and document
1. manual operational tool 1set 2. foundational screw 1set
3. operational manual 1set 4. system servo motor and servo driver etc document 1set
5. acceptance certificate and packing list
main parameter and performance
| Specification | parameter | ||
| Main parameter | Bed width | 755mm | |
| Max swing diameter over bed | 1040mm/1290mm/1440mm | ||
| Max workpiece length | 1000-12000mm | ||
| Max swing diameter over tool post | 650mm/900mm/1050mm | ||
| Max bearing weight between two centers | 6tons(please limit speed when workpiece is too weight) | ||
| Workpiece weight without tailstock support | 2tons (please limit speed when workpiece is too weight) | ||
| Main transmission | Spindle front bearing | 200mm | |
| Spindle rotation range | 3.15-315r/min (24kind),spindle through diameter 120mm | ||
| Front taper of Spindle inner hole | Metric 140 | ||
| Main motor power | 22kw | ||
| Spindle nose | A2-15 | ||
| Feed | x/z axis travel | 500(625 is cks61125d)/900-11900mm | |
| X axis rapid speed | 4m/min | ||
| Z axis rapid speed | 4m/min | ||
| KND1000T CNC system Or SIMENSIS808D | X axis servo motor torque | 27N.m | |
| Z axis servo motor torque | 50N.m | ||
| Vertical four position tool post | Manual tool post | ||
| Cutting tool cross face | 45×45 | ||
| Special order | vertical four position automatic tool post | AK21300 | |
| Cutting tool cross face | 45×45 | ||
| vertical four position automatic tool post | AK23320 | ||
| Cutting tool cross face | 45×45 | ||
| Tailstock | Tailstock shaft diameter | 160mm | |
| Tailstock shaft travel | 300mm | ||
| Tailstock shaft taper hole | Morse 6# | ||
| Auxiliary support | 1m,1.5m not include steady rest,2-8m with 1set, and 9-12m with 2sets | ||
| Close type steady rest | 70-480 | ||
| Close type steady rest(special order) | 400-700 | ||
| Chuck | Four jaw chuck | 1000 | |
| Four jaw chuck(special order) | 1250 | ||
| Four jaw chuck(special order) | 1400 | ||
