Audited Supplier
CM610
24 Hours
1 Year
Pneumatic, Hydraulic, Electric
ID Mounted
20-43 Rpm
145-812mm
152-865mm
50kg
100kg
80*58*58
CAMINIX
Plywood Cases
depends on size
China
9031809090
Product Description
Portable Flange Facing Machine Model CM860
Portable flange surface processing machine CM610 is mainly used for on-site processing of flange sealing surfaces such as flange smooth surface, water line, straight groove, RTJ sealing groove, lens sealing surface, heat exchanger sealing surface, etc. It can be located at any angle. processing.
Processing material: cast iron, alloy structural steel, stainless steel, aluminum and other metal materials.
According to different sizes, we have different models.
No.Model Name Clamping Range Facing Range
Features:
Portable flange surface processing machine CM610 is mainly used for on-site processing of flange sealing surfaces such as flange smooth surface, water line, straight groove, RTJ sealing groove, lens sealing surface, heat exchanger sealing surface, etc. It can be located at any angle. processing.
Processing material: cast iron, alloy structural steel, stainless steel, aluminum and other metal materials.
| Mounting Method | Inner Diameter Mounted |
| Motor | 1.1 HP |
| Rpm | 20-43 Rpm |
| Weight | 55KG |
| Clamping Range | 145-812mm |
| Processing Range | 152-865mm |
| Tool Travel Range | 50mm 2'' |
According to different sizes, we have different models.
No.Model Name Clamping Range Facing Range
1 CM305 50-320mm 50-355mm
2 CM610 50-508mm 50-610mm
3 CM860 145-812mm 152-865mm
4 CM1000 145-927mm 152-1016mm
5 CM1500 290-1400mm 305-1500mm
6 CM2000 604-1830mm 610-2032mm
7 CM3000 1120-2800mm 1150-3050mm
8 CM3500 1120-3200mm 1150-3500mm
9 CM4000 1450-3900mm 1450-4055mm
Features:
- Inner Clamp Installation, High Rigid Support, Suitable Big Cutting processing requirements , High efficiency
- The tool holder angle can rotate, wide application
- Two mode selection, Pneumatic or Electric mode
- Feed Handwheel with scale , accuracy feeding
- Tool Axial and radial automatic feeding with high precision
- The tool can be adjusted in 50mm.
- Surface roughness below Ra 0.8 um
- Rotating Speed wide adjustable ,meet different processing requirements
- Horizontal, Vertical, Upside, Tilting all can be installed .
- Processing Flat face, water line, Groove etc .
