Audited Supplier
Coil lifting → Coil Transportation → Coil loading → Uncoiler → Turning → No.1 side guide centering → Pinch/ feeding/ straightening → Coil head shearing → Angle Shearing → Pickling → Rinsing → Hot air drying → No.1 pinch roll → Outlet looper → No.2 Side guide centering → No.2 pinch roll (with CPC device) → No.3 Side guide centering → Edge slitting machine and scrap winder → three-roll tension → horizontal inspection platform → Coil tail shearing → Outlet steering/ feeding → Recoiler → Coil unloading→ Bundling
Raw material: Plain Carbon Hot Rolled Steel Coils
Thickness: 1.4mm ~ 4.6mm
Width (before cutting edge): 1350mm
Coil I.D.: 610mm/ 760mm
Coil O.D.: Max. 2150mm
Coil weight: Max.30MT
Tensile strength: Max 610N/mm²
Yield strength: Max 360 N/mm²
Size, shape and allowable deviation: according to Chinese national standard
Sheet tower shape range: ≤20mm when Width ≤1000 mm
Thickness tolerance: within ±5 % of the nominal thickness
Width tolerance: 0 ~+5mm
Convexity: Max. 50μm
Camber: Each 2000mm in the length direction is not more than 6mm
Flatness: Less than 220 l
