Audited Supplier
M-SAAB009
Carbon Steel
Anchor Bolt
Common Bolt
Hexagonal
DIN, ANSI, GB, JIS, BSW, GOST, Customized
8.8
Machinery, Chemical Industry, Environmental, Building, Concrete
Color-Zinc Plated
Carbon Steel/Alloy Steel/Stainless Steel
1010/1021/1035/1045 A2/A4/201/304/316/410
Black Oxide/Plain/Blue/Clear/Yellow/Gold/HDG Zinc
Rust/Corrosion Resistant Anti-Rust/Corrosion
1"~12" 25mm~300mm
Inch Size Metric Size
Unc/Unf/Bsw/Bsf/Metric Coarse/Metric Fine
Concrete/Cementmasonry/Construction/House/Building
Samples in Stock Are Free with Freight Collect
Customization by Drawing/Sample
Eye Bolt Anchor/O Shape Anchor/Expansion Anchor
EXW/Fob/CFR/CIF
Production 15~30 Days/Stock 3 Days
Available
Factory Manufacturer Wholesaler
Hilow
Bulk Package Palletizing
M6~M16 3/16"~3/4"
China
7318150000
Product Description
Sleeve Anchor
| Type: | Sleeve Anchor |
| Definition: | Sleeve anchors are versatile masonry expansion anchors. They can be used in a variety of base materials, and they are available in a wide variety of diameters, lengths, and head styles. They come preassembled, so they are ready for immediate installation. |
| Description: | A sleeve anchor is made up of three parts: an internally threaded expansion bolt, a split sleeve with ridges on the outside, and a nut. A flat headed sleeve anchor is a special type of masonry fastener made up of four parts: an internal stud that is flared outwardly and cone shaped on one end with the other end threaded, a sleeve that fits over the internal stud, and a flat countersunk head that threads onto the stud. |
| Application: | Sleeve Anchor are used for anchoring and securing material and equipment to concrete masonry surfaces. Sleeve anchors are inserted into pre-drilled holes, and then they can be expanded for a secure fit, anchoring objects to the concrete, brick, or block. The wedge anchor, drop-in anchor and concrete strike anchor can only be used in solid concrete and have the highest & most consistent holding values in concrete. Concrete sleeve anchors can be used in concrete, brick or block but their holding values are less in terms of shear and pullout values. |
| Others: | Sleeve anchors require a hole that is the same diameter as the anchor being installed. For example, a 3/8" anchor requires a 3/8" hole to be drilled. The depth of the hole that is drilled into the base material must be a minimum of 1/2" deeper than the anchor will penetrate. |
| Feel Free to contact us if you have any questions. | |
