Audited Supplier
| Product name | Open ostomy bag one-piece or two-piece |
| Model | A002-1(mesh film/non-woven fabric / non-woven fabric outer ring) |
| Specification | 15×27,10 pieces/box, 20pieces/box /oem |
| Product feature | soft and breathable(non-woven fabric, mesh film),low risk of allergy, no leakage, no swell, the buckle and folding strap are easy to use. |
| Application scope | suitable for people with colostomy or ileostomy |
| Expiry date | three years |
| Storage condition | store in a cool, clean and dustless environment, away from direct sunlight |
| Note | follow a doctor's advice; Wipe the skin around the stoma before wearing the ostomy bag, in order to keep the skin dry, and ensure that the ostomy bag will remain sticky; Do not arbitrarily discard it after use. |
2. Measure the size of the stoma with the measuring card supplied. Do not touch the stoma with your fingers while measuring it.
3. According to the measured size and shape of the stoma, cut a hole of an appropriate size on the film of the ostomy flange.The hole diameter is usually 2mm bigger than the stoma diameter.
4. Peel the protective release paper on the inside ring of the flange and stick aiming at the stoma(It is good to blow air into the bag before sticking, in order to prevent thin films from sticking to each other), and then strip the protective release paper on the outside ring, and carefully paste up from the middle towards the outside.
5. In order to make stickup secure(especially in areas and seasons with low temperature), you should press the pasted part with your hands for several minutes, in turn, the hydrocolloid flange could increase viscosity with the rising temperature.
A): Can we get samples?
--------Yes, you can get samples for free.but you have to afford freight .Samples will be sent within 3-5 days for regular
products.
B):What is the payment method?
--------We recommend using Alibaba to pay, and support T/T, Western Union ,Paypal, LC at sight and other payment methods.
C):What are your advantages?
--------BAI SHUN Group is a high-tech enterprise dedicated to the development and production of medical devices and disposable consumables. Our factory was founded in 2010 . Products have passed ISO and CE certification.
D): Can we print my own logo?
--------Yes. of course. OEM services are available.
E): What is the normal lead-time?
--------5-10 days after receiving payment if in stock . bulk order 30-40 days for regular orders.
