Audited Supplier
Shanghai Jebsen Sample Co., Ltd.
The partition on the left appears to have a combination of a fabric or acoustic panel finish in a muted color, likely chosen for sound absorption and a professional aesthetic. This type of finish is often used in office settings to help reduce noise and provide a more comfortable acoustic environment.
The panel on the right, however, is unfinished plywood, indicating that it's still in the installation phase. The plywood may serve as a backing material for a different finish that will be applied later, such as laminate, veneer, or fabric, depending on the design requirements.
Q1: How to choose a suitable movable wall for your venue?
A: We have 4 types of movable walls, type 65, type 85, type 100 and ultra-high type 125. You can choose a suitable movable wall according to the following height and sound insulation requirements. Type 65-maximum height: 3000 mm, sound insulation: 32db to 43db. Type 85-maximum height: 6000 mm, sound insulation: 40db to 50db. Type 100-maximum height: 12000 mm, sound insulation: 50db to 55db. Type 125-maximum height: 17000 mm, sound insulation: 52db to 55db.
Q2: What is the price of the movable partition?
A: Our movable partitions are customized, and the cost is calculated based on the total square meters. Different types have different prices. So we need you to provide us with detailed dimensions, such as height. The width, the location of the partition storage room, in order to make a more accurate quotation, we also need your help, if possible, it is better to have design drawings.
Q3: What are the options for surface materials?
A: We can provide you with medium-density fiberboard, flame-retardant plywood, gypsum board, etc. as the bottom plate. We can also provide melamine board, sound-absorbing board, lacquered glass, various fabrics, various leathers for your decoration
Q4: Can I choose the color?
A: Yes. We provide many colors for various materials, such as fabric, melamine, aluminum.
Q5: Can I change the product size?
A: Our products are customized products. You only need to provide the site length and height, and we will calculate a suitable width. Of course, it can also be changed according to your design requirements, but it cannot exceed our minimum/maximum width.
Q6: What special services will you provide us?
A: We provide the best CAD design, such as your new office project. You are only responsible for sending me CAD dwg. I will do the rest for you.
Q7: Can I buy some samples before ordering?
A: Of course, we have sample service for each series of products
Q8: How to install partitions? Can this be done?
A: It is not difficult to install our partition. We need a steel structure support system on the partition before installing the track. Therefore, the top steel structure support system will be very important. We can provide you with a complete design plan. You only need to install it according to the drawings.
