Battery Management SystemA:BMS function introduction 
1):The BMS is designed for lithium battery. 
2):The BMS have all functions which are :
 1 overcharge detection function .
2 over discharge detection function .
3 over current detection function .
4 short detection function .
5Temperature detection function .
6 balance function .
7 communicate function .
8 Alarm function .
9 Total capacity function .
10 Storage history function

Packing:
The finished product area of the factory, as well as the product packaging and delivery area, are generally packaged in standard carton boxes, and wooden box packaging can also be added. The packaging area has cranes to ensure the safety of employees and products.

Storage and Others:
If stored for a long time(don't used,exceed three months), the cell and pack should be stored in drying and cooling place. The PACK is to be stored in a condition that the temperature of 23±2ºC and the humidity 0f 45%- 75%. Long-term use of unused batteries to recharge every 3 months. Ensure that the battery voltage is within the above range.