Commercial Juicer Industrial Fruit Juicer Machine Juicer Machine Orange Lemon Juicing Machine Juice Extruding Machine

Working principle: the main component of this equipment is the spiral along the direction of slag outlet gradually increase the bottom diameter and pitch gradually reduced, when the material is screw-driven, because of the reduction of the volume of the spiral cavity, the formation of the material press. The direction of rotation of the screw spindle is clockwise direction from the direction of the feed hopper to the slag tank. The raw material is added into the feed hopper and pressed by the screw. The juice from the press flows through the filter screen to the juicer at the bottom, while the waste material is discharged through the annular gap formed between the screw and the pressure-regulating conical part, the axial movement of the pressure regulator can adjust the size of the gap. For clockwise (from the device's slag tank to the end of the feed hopper to see the rotation of the handwheel shaft when the bearing block, pressure head to the left, the gap that is reduced, and vice versa, the gap becomes larger.) Change the size of the gap, that is, adjust the resistance of slag discharge. But if the space is too small, under the strong extrusion, some particles of the residue will be squeezed out together with the juice through the filter screen. Although the juice is increased, the quality of the juice is relatively decreased, the size of the gap shall be subject to the specific process requirements of the user.