Audited Supplier
3C
After Sell Service
15 Years
PVC
Modern
Anti-Slip, Wear-Resistant, Fireproof, Waterproof
2mm
Soft
Simple Color
Puzzle
Multi-Color
Coil
Household, Commercial
3c
Carton
2mx30m 1.83x30m
Zhejiang
Product Description
Product description:
Product feature:
Company introduction:
3C Floor Industrial was founded in 2003, we specializing in PVC Heterogeneous, Homogeneous, Quickfix Floor, WallPanel and new decorative materials with two manufacture headquarters located in Shanghai and Zhejiang. Our products has been widely used in the airport, hospital, university, kindergarten, shopping mall, office and so on.
Our products not only sell well in domestic market, but also exported to more than 30 countries and regions. The key cases such as university of Macao, most of 2010 Shanghai Expo pavilions, Chengdu Shuangliu International Airport, Pinan Bank.
3C flooring participate in the establishment of national PVC flooring industry standard GB-T11982.2, in order to promote the development of PVC flooring in China and the world. The company gained the title" National HighTech Enterprise" for several years and won the logo "Shanghai Famous Brand" in 2012.
Packaging & Shipping
Construction process:
1, base treatment: use sanding machine to remove sand, oil, remnants, etc. from the surface of the base layer;
2, Interface agent: After the ground is thoroughly cleaned, evenly roll the interface once;
3, Self-leveling: Pour self-leveling cement onto the construction ground in sequence, and scraped with a squeegee scraper, and the thickness is about 2~4mm;
4, Positioning of the line: According to the design pattern, PVC anti-static floor specifications, room size, division, and line positioning;
5, Conductive Adhesive: Use PVC anti-static floor special conductive adhesive, evenly scrape with a squeegee scraper:
6,Fix copper foil: Lay a copper foil strip on the ground according to the specified size to form a network;
7, Laying the Anti-static floor: starting from the center position, spread out from block to block, the gap between each floor is 2-3 mm;
8, Floor slotting: U-shaped diameter 2.0-2.5 mm;
9, Floor welding rod: Φ3.5-4.0 mm PVC special welding rod;
10, Floor welding: use 800-1000W welding torch to weld along the gap between the floors, and the welding rod should be shoveled to the same level as the surface plate;
11, Floor waxing: The surface must be cleaned for polishing and waxing.
10 Construction completed: It can be used normally after 12 hours (25°C, the low temperature opening time should be moderately extended)
Our service:
.
Product feature:
Company introduction:
3C Floor Industrial was founded in 2003, we specializing in PVC Heterogeneous, Homogeneous, Quickfix Floor, WallPanel and new decorative materials with two manufacture headquarters located in Shanghai and Zhejiang. Our products has been widely used in the airport, hospital, university, kindergarten, shopping mall, office and so on.
Our products not only sell well in domestic market, but also exported to more than 30 countries and regions. The key cases such as university of Macao, most of 2010 Shanghai Expo pavilions, Chengdu Shuangliu International Airport, Pinan Bank.
3C flooring participate in the establishment of national PVC flooring industry standard GB-T11982.2, in order to promote the development of PVC flooring in China and the world. The company gained the title" National HighTech Enterprise" for several years and won the logo "Shanghai Famous Brand" in 2012.
Packaging & Shipping
Construction process:
1, base treatment: use sanding machine to remove sand, oil, remnants, etc. from the surface of the base layer;
2, Interface agent: After the ground is thoroughly cleaned, evenly roll the interface once;
3, Self-leveling: Pour self-leveling cement onto the construction ground in sequence, and scraped with a squeegee scraper, and the thickness is about 2~4mm;
4, Positioning of the line: According to the design pattern, PVC anti-static floor specifications, room size, division, and line positioning;
5, Conductive Adhesive: Use PVC anti-static floor special conductive adhesive, evenly scrape with a squeegee scraper:
6,Fix copper foil: Lay a copper foil strip on the ground according to the specified size to form a network;
7, Laying the Anti-static floor: starting from the center position, spread out from block to block, the gap between each floor is 2-3 mm;
8, Floor slotting: U-shaped diameter 2.0-2.5 mm;
9, Floor welding rod: Φ3.5-4.0 mm PVC special welding rod;
10, Floor welding: use 800-1000W welding torch to weld along the gap between the floors, and the welding rod should be shoveled to the same level as the surface plate;
11, Floor waxing: The surface must be cleaned for polishing and waxing.
10 Construction completed: It can be used normally after 12 hours (25°C, the low temperature opening time should be moderately extended)
Our service:
.
