Audited Supplier
2. Introduction:
The DSE7320 is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set applications. Monitor an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC and via SMS text alerts (with external modem).
• 4-Line back-lit LCD text display
• Five key menu navigation
• Front panel editing with PIN protection
• Customisable status screens
• Power save mode
• Support for up to three remote display units
• 9 configurable inputs
• 8 configurable outputs
• Flexible sender inputs
• Configurable timers and alarms
• 3 configurable maintenance alarms
• Multiple date and time scheduler
• Configurable event log (250)
• Tier 4 CAN engine support
• Integral PLC editor
• Easy access diagnostic page
• CAN and Magnetic Pick-up/Alt. sensing
• Fuel usage monitor and low fuel alarms
• Charge alternator failure alarm
• Manual speed control (on compatible CAN engines)
• Manual fuel pump control
• Engine exerciser
• "Protections disabled" feature
• kW & kV Ar protection
• Reverse power (kW & kV Ar) protection
• LED and LCD alarm indication
• Power monitoring (kW h, kV Ar,kV A h, kV Ar h)
• Load switching (load shedding and dummy load outputs)
• Automatic load transfer (DSE7320)
• Unbalanced load protection
• Independent Earth Fault trip
• True dual mutual standby with load balancing timer (DSE7310 only)
• USB connectivity
• Backed up real time clock
• Fully configurable via DSE Configuration Suite PC software
• Configurable display languages
• Remote SCADA monitoring via DSE Configuration Suite PC software
• User selectable RS232 and RS485 communications
• Configurable Gencomm pages
• Advanced SMS messaging (additional external modem required)
• Start & stop capability via SMS messaging
• Additional display screens tohelp with modem diagnostics
• Idle control for starting & stopping.
• DSENet ® expansion compatible
• Heated display option available
• 132 x 64 pixel ratio display for clarity
• Real-time clock provides accurate event logging
• Multiple date and time scheduler
• Set maintenance periods can be configured to maintain optimum engine performance
• Ethernet communications (via DSE855 module), provides advanced remote monitoring
• Modules can be integrated into
building management systems (BMS)
• Increased input and output expansion capability via DSENet ®
• Licence-free PC software
• IP65 rating (with supplied gasket) offers increased resistance to water ingress
• PLC editor allows user configurable functions to meet specification application requirement
| DC Supply | |
| Continuous voltage rating | 8 to 35 V Continuous. |
| Cranking Dropouts | Able to survive 0 V for 50mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achineved without the need for internal batteries. Leds and backlight will not be maintained during cranking. |
| Maximum operating current | 340mA at 12 v, 160mA at 24V |
| Maximum standby current | 160 ma at 12 V. 80mA at 24V |
| Charge Fail/ Excitation Range | 0 v to 35 v |
| (Mains utility) | |
| Voltage Range | 15v- 333v ac (L-N) |
| Frequency Range | 3.5 Hz to 75Hz |
| OUTPUTS | |
| Voltage Range | |
| Output A(fuel) | 15A DC at supply Voltage |
| Output B (Start) | 15A DC at supply Voltage |
| Output C & D | 8A 250V ( Volt free) |
| Auxiliary outputs e,f,g,h | 2A DC at supply voltage |
| Generator | |
| Voltage Range | 15 v -333v 72Hz |
| Frequency Range | 3.5 Hz to 75Hz |
| Magnetic Pick up | |
| Voltage Range | ± 0.5v to 70v |
| Frequency Range | 10000 Hz (max) |
5. We Sell More Related Controller Brands:
Deepsea
ComAp
Harsen
Smartgen
Woodward...
6. Our Advantages:
- Our generator parts factory has more than 20 years experienced to produce and widely used in many generators already.
- We can provide full range of generator parts that you want:
Multiple brands of generator controller
Multiple brands of filters
Multiple brands of turbochargers
- Offer OEM and Technical support
- Excellent quality control and after sales service
- Flexible payment terms: T/T, L/C, Paypal and West Union
7. Warranty Policy:
- Warranty: 6 months from the date of shipment
- The items share free repairs or replacement during warranty
- Customer is responsible for the freight come-and-forth and the custom tax.
- You may consider to send the defective item with a economical way, and we send back the repaired items with your new order together.
- pls send the item back without packing To save the cost
- Pls provide the defective appearance and related invoice number.
- We do not repair or replace item after expiration.
