Audited Supplier
DJ06-4010-20
Available
One Year
Storage Pressure Vessel
Gas
Carbon Steel
10.0MPa≤p<100.0MPa
Moncombustible/Nontoxic
High Pressure (10.0MPa≤p<100.0MPa)
New
zhongbang
Standard Shipping
12192*2438*1730mm
China
8609003000
Product Description
This product is a mobile pressure vessel which is connected by cylinder group and container frame, pipeline, safety accessories, loading and unloading accessories and other components. It is the special mobile pressure vessel that suitable for storing and transporting compressed gas such as air, hydrogen, natural gas and so on, suitable for road transportation, sea and land combined transportation. Advantage 1. Large filling capacity, light weight, cost-effective; 2. High safety: the bottle material is good plastic toughness, uniform force, reasonable stress distribution; 3. Good fatigue resistance: the use of finite element fatigue analysis and design, to ensure the good fatigue resistance of the equipment; 4. Both ends of the bottle body are provided with safety discharge device. In case of abnormal working conditions such as overpressure and fire, the safety discharge device will work automatically to ensure the safety of property and personnel.
1,Basic technical parameters table for hydraulic gas filling substation:
| project | technical parameter | project | technical parameter |
| working pressure | ≤ 20MPa | Exhaust volume | ≥ 2000NM3/H (101.325kPa, 20 ºC) |
| High pressure gas outlet pipe | internal diameter ф 18mm | Gas extraction rate | 95% (at a working pressure of 20MPa for gas injection) |
| Residual pressure after unloading the steel cylinder | 1MPa | Adapt to ambient temperature | -40 ºC~+50 ºC |
| Main motor power | 30KW | Total system power | ≤ 80KW |
| Equipment weight | Approximately 6565Kg | Equipment noise | ≤ 75dB, at a distance of 1 meter from the equipment |
| Finished gas contains oil | ≤ 10ppm | Dust containing particle size | ≤ 5 µ m |
| control mode | PLC programmable automatic control | Work cycle | continuity |
| Exhaust temperature | Normal temperature (ambient temperature) | Explosion proof level | Exdem [ia] ia BT4 |
| Gas system pressure gauge | Select domestic products with an accuracy level of 1.5 | Equipment size (mm) | 4602 long × Width 2162 × High 2510 |
| Time for converting quick fitting joints between two vehicles: | 3-5 minutes (after the quick installation joint conversion is completed, the second vehicle starts working, and the first vehicle's return oil does not affect the second vehicle's refueling). | ||
| On site display instruments and control devices | Set up pressure gauges at the equipment operation site; The equipment operation area is equipped with emergency stop buttons and start buttons. | ||
