Concrete Electric Pole Forming Machine Professional Manufacturer Spun Concrete Pole Spinning Machine

Price $30000.00 Compare
Min Order 10 Sets
Availability In Stock
Shipping From Shandong, China
Popularity 270 people viewed
Quantity
+-
 

Shandong Haiyu Industry Group Co., Ltd.

VIP   Audited Supplier 3 years
Profile Certified by SGS/BV
Turn-Key Service
2 Years
Iron
New
Customized
Inverter
Industry
Pipe Production Line
Customize
ISO 9001
Customize
Circular or Square
Provided
HAIYU
Container
5m-32m
China
847480
Product Description
Advantages of centrifugal concrete pole mold :
1.Cylinder body: The material blanking according to the customer's order model. The Maximum single length is 12m , And the cylinder body has less welding seams ,which reduces the influence of welding deformation and the error of manual docking. 
2.Running wheel: The material is adopted 30Mn cold roll forming, with good wear 
resistance.
3.Welding: It is advisable to adopt the section welding process, the welding method is carbon dioxide shielded 
welding, the gas is mixed gas, and the welding machine adopts Panasonic welding machine, the welding spot is beautiful, and there is no welding slag.
4.Lathe: Introduce CW61180L-16m ultra-long lathe, ∅1000mm×15.4M and below specifications are open for overall 
processing, and the concentricity of the steel mold is better.
5.Anti-leakage grout: Our company uses a planer for a groove at the 
joint between the upper mold and the body, and an elastic sealing rubber strip is inserted into the groove. This rubber strip can be reused or replaced at any time. Put an end to the problem of ground joint leakage.
Centrifuge composition diagram
Advantage of Spinning Machine:
1.Through shaft: Material is 40Cr, medium frequency conditioning to HB220-280, high tensile strength, yield strength and hardenability, good toughness.
2.Supporting wheel: material is 40Cr forgings, medium frequency conditioning to HRC35-40, strong 
impact resistance, good wear resistance;The wheel can be integral retaining edge and movable retaining edge.
3.Tightening sleeve: 
material is 45# forgings, conditioning to HB220-280, yield strength ≥355Mpa
4.Bearings: Wafangdian bearings - comprehensive 
economic and technical indicators in the bearing industry in China ranked first, the world ranked 12th.
5.Bearing seat: Material 
is ZG35.
6.Base:Material is ZG35 or H STEEL ( Q235B).
7. Electrical system: Due to the deformation of individual centrifugal
molds(pole/pipe/pile mold) or irregular mold clamping, mold jumping or mold flying may occur during high-speed centrifugation, which is a major safety production hazard. In response to this situation, our company has developed an anti-jumping mode frequency conversion cabinet. The system has two functions: automatic frequency reduction and manual frequency reduction. The automatic frequency reduction can be automatically realized three times, and the corresponding centrifugal time can be increased for each frequency reduction. The basic frequency can be set according to different types of molds, and the current percentage can be monitored. In the phase of raising the speed, the acceleration time is superimposed to ensure that the raising speed is more balanced. At the same time, users can also select the energy feedback unit. The energy feedback unit automatically detects the DC bus voltage of the frequency converter, reverses the DC voltage of the DC link of the frequency converter into the AC voltage with the same frequency and phase as the grid voltage, and is connected to the AC grid after multiple noise filtering links, so as to achieve the purpose of energy feedback to the grid, The electric energy fed back to the power grid reaches more than 95% of the power generation energy, effectively saving electric energy.
Concrete pole production line supporting machine

 
  • Contact Supplier
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA  
$3500.00 1 Piece(MOQ)

Prestressed Concrete Pole Centrifugal Spinning Making Machine Concrete Electric Pole Steel Mould Equipment

Shandong Haiyu Industry Group Co., Ltd.
$3000.00 1 Piece(MOQ)

Pretensioned Spun High Strength Concrete Pile End Plate 300mm

Shandong Haiyu Industry Group Co., Ltd.
$6000.00 1 Piece(MOQ)

Size Can Be Customized Concrete Electricity Square Poles Production Line

Shandong Haiyu Industry Group Co., Ltd.
$3500.00 1 Piece(MOQ)

South American Market Concrete Pole Mould for Sale Concrete Pole Making Machine Electric Concrete Pole Manufacturing Plant

Shandong Haiyu Industry Group Co., Ltd.
$300000.00 1 Set(MOQ)

Factory Direct Sale Automatic Pipe Making Machine/Tube Welding Machine/Tube Mill

Foshan Gaoming Yongshunfa Building Materials Co., Ltd.
$20000.00 1 Piece(MOQ)

HVAC Roll Cutter Galvanized Stainless Spiral Duct Tube Pipe Mould Making Machine

MAANSHAN RUIYI MACHINERY CO., LTD.
$2900.00 1 Piece(MOQ)

Air Rectangular Duct Transverse Flange Forming Machine/Tdf Machine

MAANSHAN RUIYI MACHINERY CO., LTD.
$120000.00 1 Set(MOQ)

High-Frequency Core Mold Vibrating Concrete Pipe Making Machine/Cement Machine

Dostar Industry Material(Wuxi) Co., Ltd
$295000.00 1 Set(MOQ)

Pipe Welding Equipment for Stainless Steel Tube Production Stronger Round Square Rectangular Pipe Making Machine Tube Mill

KINGTECH TUBE MILL CO.,LTD
$295000.00 1 Piece(MOQ)

High Frequency ERW Iron Carbon Steel Welded Pipe Making Machine Automatic Pipe Welding Machine Line Tube Mill Manufacturer Price

KINGTECH TUBE MILL CO.,LTD