Condensate Processor Oil Water Separator Air Compression Equipment Air Treatment

GS Condensate / oil Separator assists customers in protecting the environment, ensuring produce compliance with environmental regulations, and reducing the cost of hazardous waste disposal. The oil content in wastewater that can be directly discharged should be ≤20mg/L. By selecting and using the GS Condensate (Oil)Separator correctly, the oil content in the condensate can be controlled to ≤15mg/L (lowering the flow rate can achieve ≤10mg/L), purifying the wastewater to meet environmental discharge standards."
 

The Importance of Condensate Separator
"When operating a compressed air system, a significant amount of condensate is generated, consisting primarily of water, lubricating oil, and other impurities. Typically, it is composed of about 99% water and 1% oil, where 1 liter of lubricating oil can contaminate 1000m³ of ground water. For a 15m³/min oil-injected rotary screw air compressor running for 8000 hours, the oil content in the condensate can reach 24 liters when calculated at 3ppm. Directly discharging condensate can lead to environmental pollution, and if treated as hazardous waste, the cost can be substantial.
GS Condensate / oil Separator assists customers in protecting the environment, ensuring produce compliance with environmental regulations, and reducing the cost of hazardous waste disposal. The oil content in wastewater that can be directly discharged should be ≤20mg/L. By selecting and using the GS Condensate (Oil)Separator correctly, the oil content in the condensate can be controlled to ≤15mg/L (lowering the flow rate can achieve ≤10mg/L), purifying the wastewater to meet environmental discharge standards."
 

Oil-laden compressed air condensate enters the depressurization chamber through the inlet. System pressure is released in the depressurization chamber, allowing the condensate to slowly enter the filtration chamber. The oil-absorbing filter element in the filtration chamber adsorbs and filters out the majority of oil droplets from the condensate. The condensate, now containing only trace amounts of oil, passes through the purification filter for the final filtration and purification. The filtered condensate water is discharged directly through the outlet."

Condensate from oil-laden compressed air enters the depressurization chamber through the inlet. System pressure is released in the depressurization chamber, allowing the condensate to flow into the pre-separation chamber. In the pre-separation chamber, the condensate automatically separates based on the different gravities of oil and water. The continuously thickening upper oil layer flows through the overflow device into the oil storage tank. The lower layer, with the least amount of oil in the condensate, flows through another overflow pipe into the primary filtration chamber, where the majority of oil droplets are adsorbed and filtered.

Model	GS130	GS260	GS520	GS1000	GS1580	GS2360
Referring Photo
Compressor Machine Flow Rate	4.2	8.3	15.8	30.6	47.2	71.2
Inlet size	G1/2″	G1/2″	2*G1/2″	2*G1/2″	2*G3/4″	2*G3/4″
Outlet size	G1/2″	G1/2″	DN25	DN25	DN32	DN32
Oil outlet size	/	/	DN40	DN40	DN40	DN40
Maximum Operating Pressure	16bar	16bar	16bar	16bar	16bar	16bar
Working temperature	5-60	5-60	5-60°C	5-60°C	5-60°C	5-60°C
Material	PE	PE	PE	PE	PE	PE
Size W×L×H(mm)	455×390×780	455×390×780	1145*430*1040	1145*430*1040	1145*430*1150	1145*430*1300
Weight(kg)	14	21	43	55	73	92

Q2. What's payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.

Q3. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
     2. Well-trained engineers available to overseas service.
     3.Worldwide agents and after service avaiable.arrange our engineers to help you training and installation.

Q4. How about your warranty?
A: One year for the whole machine and two years for screw air end, except consumable spare parts.

Q5. Do you have any certificate ?
A: Yes, per different customer's market need ,we can offer CE ,ISO etc certificate.

Q6. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.

Q7. How do you control quality ?
A: 1. The raw materials are strictly inspected
     2. Some key parts are imported from overseas
     3. Each compressor must pass at least 5 hours of continuous testing before leaving the factory.