Audited Supplier
1.0 1.2 1.4 1.5mm
Metal Abrasives
Metal Abrasives
Valves
Surface Cleaning
Artificial Abrasives
Abrasive
HRC50-52
Conditioned Steel Cut Wire Shot
1.0 1.2 1.4 1.5mm
Round
SAE
Original
ISO 9001
25kg/Bag, 1000kg in a Pallet/Ton Bag.
1.0 1.2 1.4 1.5mm
Tengzhou City
732611000
Product Description
| Name | Conditioned steel cut wire shot | |
| Chemical composition | C | 0.45-0.75% |
| Mn | 0.60-1.2% | |
| Si | 0.10-0.30% | |
| S | ≤0.05% | |
| P | ≤0.05% | |
| Hardness | 40-52HRC | |
| Metallographic structure | Deformed pearlite | |
| Density | ≥7.40g/cm3 | |
Steel Structural Parts
For the steel structure, the rate of corrosion is mainly related to the relative humidity of the air as well as the composition of the pollution in the atmosphere. In order to prevent or reduce metal corrosion and prolong its service life, do the surface treatment of steel structures, and then form a protective film on the metal surface by painting and spraying to isolate metals from corrosive media, so that can prevent corrosion of metals.
Hull Segmentation
The quality of hull sandblasting abrasive directly affects the quality of coating, sandblasting efficiency, kinetic energy, abrasive consumption and other quality and cost factors. With the new performance standard for protective coatings(PSPC),the quality of segmented sand blasting now has higher requirements. Therefore, the quality of metal abrasive is particularly important in blasting .
Port Machinery
Port machinery has a high requirement of the corrosion resistance of steel structure because of the heavy use of them.Especially the port machinery is often close to some special circumstances such as humid environment, so the corrosion is very serious.In this case, requires the use of sandblasting and coating corresponding to complete protection of port machinery.
Container
Blast the container after welding can clean up the weld bead meanwhile make the surface has certain roughness,increase corrosion resistance of coating. So that the container can transfer between ships,chassis cars, trains and rolling stock.
For the steel structure, the rate of corrosion is mainly related to the relative humidity of the air as well as the composition of the pollution in the atmosphere. In order to prevent or reduce metal corrosion and prolong its service life, do the surface treatment of steel structures, and then form a protective film on the metal surface by painting and spraying to isolate metals from corrosive media, so that can prevent corrosion of metals.
Hull Segmentation
The quality of hull sandblasting abrasive directly affects the quality of coating, sandblasting efficiency, kinetic energy, abrasive consumption and other quality and cost factors. With the new performance standard for protective coatings(PSPC),the quality of segmented sand blasting now has higher requirements. Therefore, the quality of metal abrasive is particularly important in blasting .
Port Machinery
Port machinery has a high requirement of the corrosion resistance of steel structure because of the heavy use of them.Especially the port machinery is often close to some special circumstances such as humid environment, so the corrosion is very serious.In this case, requires the use of sandblasting and coating corresponding to complete protection of port machinery.
Container
Blast the container after welding can clean up the weld bead meanwhile make the surface has certain roughness,increase corrosion resistance of coating. So that the container can transfer between ships,chassis cars, trains and rolling stock.
