Audited Supplier
Product Description
Instruction for Bare Conductor
Application
AAC,AAAC and ACSR have been widely used in power transmission lines with various voltage levels,because they have such good characteristics as simple structure,convenient installation and maintenance,low cost large transmission capacity.And they are also suitable for laying across rivers valleys and the places where special geographical features exist.
Service Performance
The permissible long-time operating temperature for aerial conductor is 70°C.
Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area,the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
Material Standard
The hard aluminum conductor used for AAC and ACSR conforms to the standard GB/T 17048-1997(equivalent to IEC 60889:1987).
The Zinc coated steel wire used for ACSR conforms to IEC60888:1987
Production can be arranged according to customer's requirements for material Standard
The Details of Products
The data sheet showed below is ACSR cable part spec of IEC61089.
Conductor Technical Structure | Unit | Value | ||
Structure | Center: steel wire | Nos./mm | 1/2.0 | |
Layer 1:steel wire | 6/2.0 | |||
Layer 2: Aluminum wire | 10/2.57 | |||
Layer 3: Aluminum wire | 16/2.57 | |||
Standard | / | GB/T1179/IEC 61089/ASTM B232 / B232M-2009 / B498 | ||
Stranding direction of outer layer | Direction | Right-hand | ||
Conductor diameter | mm | 16.28±1% | ||
Cross section | mm2 | 156.8±1% | ||
Conductor weight | kg/km | 547.8±1% | ||
Rated tensile strength | kN | 52 | ||
Modulus of Elasticity | GPa | 73.9 | ||
Coefficient of linear expansion | 10-6/ºC | 18.9 | ||
Max. DC Resistance at 20ºC | Ohm/ft | 0.637 | ||
Lay ratio | Aluminum layer | times | 16-wire layer 10-14 10-wire layer 10-16 | |
Steel layer | 6-wire layer 18-30 | |||
Qingdao Qianwang Electric Co.,ltd is specialized in all kinds of Cables and Electric Wires with 15 years. We have the most advanced automatic production lines, first-class testing & inspection equipment and laboratory for cable security test and application test. We have the technical team of local & overseas experts in cable industry. Strict quality control and safety policy ensures our products meet standards.
We also Conduit Pipes, Conduit Saddle, Cable Trays ect. to offer clients one-stop service.
1. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
2.What can you buy from us?
Wires,Cables ,Cable Assemblies,Cable Trays&Condiut pipe.
3.Can I get a free sample?
Sure,we offer free sample,you only pay the freight.
4.Payment
Our payment term is usually T/T 30% in advanced, the balance before picking up the goods.L/C,PayPal,Western Union are also acceptable.
