Audited Supplier
optic fiber
Communication
Single-mode Fiber
Round Wire
>1000(N/100mm)
100N<1000N
Single Core
CE
OEM
G.652.D
Natural or Colored
Less Than 0.35dB
Less Than 0.21dB
Dierite
Plastic Drum
20.4KM, 40.8KM, 50.4KM or customized
Changzhou Jiangsu China(Mainland)
9001100002
Product Description
Conventional single-mode fiber is also called wavelength-band extended non-dispersion-shifted single-mode fiber, and the working wavelength can be selected
1310nm, and optionally 1550nm, are the most widely used fibers.
1310nm, and optionally 1550nm, are the most widely used fibers.
Performance Highlights
1.Wider wavelength range, suitable for high-speed network.
2. Accurate mode field diameter (MFD) characteristics ensure low splice loss and good compatibility.
Application scenarios
1. 100G and B100G high-speed long-distance long-span backbone network.
2. Large-bandwidth metropolitan area network and access network.
| characteristic | condition | unit | Numerical value |
| Optical properties |
| attenuation | 1310nm | dB/km | ≤ 0.350 |
1383nm | dB/km | ≤ 0.350 | |
1550nm | dB/km | ≤ 0.210 | |
1625nm | dB/km | ≤ 0.240 |
| Relative wavelength attenuation change | 1310nm VS. 1285-1330nm | dB/km | ≤ 0.04 |
1550nm VS. 1525-1575nm | dB/km | ≤ 0.03 |
| zero dispersion wavelength | nm | 1300 - 1324 |
| Zero dispersion slope | ps/(nm2·km) | 0.073 - 0.092 |
| Dispersion | 1550nm | ps/(nm·km) | 13.3 - 18.6 |
1625nm | ps/(nm·km) | 17.2 - 23.7 |
| Polarization Mode Dispersion Coefficient (PMD) | -- | ps/√km | ≤ 0.2 |
| Cable cut-off wavelength λcc | nm | ≤ 1260 |
| Mode Field Diameter (MFD) | 1310nm | μm | 9.2±0.4 |
| 1550nm | μm | 10.4±0.5 |
| decay discontinuity | 1310nm | dB | ≤ 0.03 |
| 1550nm | dB | ≤ 0.03 |
| Attenuated bidirectional end difference | 1310nm | dB/km | ≤ 0.04 |
| 1550nm | dB/km | ≤ 0.04 |
| geometric properties | ||
| Cladding diameter | μm | 125±0.7 |
| Cladding out-of-roundness | % | ≤ 1.0 |
| Core/Pack Concentricity Deviation | μm | ≤ 0.6 |
| Coating diameter | μm | 242±7 |
| Cladding/Coating Concentricity Deviation | μm | ≤ 12 |
| Warpage | m | ≥ 4 |
| Environmental characteristics (1550nm, 1625nm) | |||
| Temperature Cycling Additional Attenuation | -60ºC to +85ºC | dB/km | ≤ 0.03 |
| damp heat aging additional attenuation | 85ºC,RH85%,30 days | dB/km | ≤ 0.03 |
| Water immersion aging with additional attenuation | 23ºC,30 days | dB/km | ≤ 0.03 |
| Dry Heat Aging Additional Attenuation | 85ºC,30 days | dB/km | ≤ 0.03 |
| Mechanical properties | |||
| Tension Screening * | -- | GPa | |
kpsi | |||
| average value | peak | N | 1.3 - 8.9 |
| average value | N | 1.0 - 5.0 | |
| tensile strength | Weber probability 50% | GPa | ≥ 4.00 |
| Weber probability 15% | GPa | ≥ 3.20 | |
| Dynamic fatigue parameter Nd | -- | -- | ≥ 20 |
| macrobending loss | |||
| Ø60mm×100 turns | 1550nm | dB | ≤ 0.05 |
| 1625nm | dB | ≤ 0.05 | |
* Higher screening tension products are available | |||
