Cooking Appliance Oven Parts Gas Geyser Magnetic Valve Gas Cooker Magnet Valve

 

Mainly used for gas cookers, water heaters, heating stoves, ovens, grills and other gas appliances.

Its working principle is when the thermocouple sensor needle is heated, it will produce thermal potential, this potential can make the solenoid valve work. Specific gas stove works as follows: when the knob is pressed, the small fire ignited, the thermocouple head is heated by the flame, resulting in thermoelectric potential (i.e., heat is converted to electrical energy). Thermoelectric potential through the wire into the solenoid valve internal coil, so that the solenoid valve produces a magnetic field, so that it quickly suction, the gas stove valve is open, the gas pathway is open to maintain normal combustion; when once encountered a gust of wind or soup and other overflow, extinguish the burning flame, then the thermocouple of the thermoelectric potential quickly drop to zero, the solenoid valve coil is de-energized, and then the solenoid valve is not suction state, the role of the spring reset quickly, so that the sealing gasket to close the gas pathway. The gasket closes the gas path and stops gas supply to ensure personal safety.
Flame failure protection device is a very important gas cooker security devices, in the gas cooker due to boiling water and other reasons for accidental flame failure, flame failure protection device of the gas cooker will automatically cut off the incoming gas supply in a few seconds; not retrofitted with this device, when the gas leakage occurs, it is easy to gather in the kitchen and indoor, not only the personal safety of the threat, such as open flames will also be an explosion.
Therefore, thermoelectric flame failure protection device can prevent gas leakage, prevent poisoning or fire accidents. Thus improve the safety of gas appliances.

 

Magnet Valve precautions
1-Magnet Valve to avoid strong impact, so as not to affect its normal use of performance, thus affecting the normal work of the Magnet Valve, such as accidentally falling to the ground need to be re-tested before use.
2. Magnet Valve in the valve body installation, need to check the valve body wall and Magnet Valve surface whether there are foreign objects or water and oil and other liquids, keep the Magnet Valve dry. Assembly needs to be vertically loaded into the broad body, otherwise it will make the Magnet Valve internal moving magnet and fixed magnet contact error occurs, the position of the gasket is also corresponding to the occurrence of misalignment, resulting in an increase in the opening current or gas leakage and other phenomena.
3 Magnet Valve gasket shall not be coated with oil and other substances
4. Magnet Valve storage must be placed in a ventilated and dry warehouse, prohibited vibration extrusion, unassembled part of the open box, need to be packaged back in one piece, so as not to be affected by moisture
 

Shengzhoug Thigo Motor Factory is located in Shengzhou, Shaoxing, Zhejiang province. We are a company integrating industry and trade and specialized in production of home appliances parts for more than 35 years .
In addition, there are well-trained R&D team and the experienced sales team of us, also, our products sell well in domestic and international markets due to great service and quality. More importantly, we launch over 10 kinds of new products yearly and hold on that first class quality, competitive prices. short lead time and excellent service can make customers satisfied.