Audited Supplier
SER
Earthing System, Lightning Protection Earthing
Low Voltage
High-rise Buildings
Direct Earthing Method
99.9% Electronic Copper and Low Carbon Steel
TT
ISO9001
Large
Socome
High Quality Q235
500-700n/mm2
Copper
1m, 1.2m, 1.5m, 1.8m, 2.4m
SOCOME
Pallets
45x40x155cm
China
7326909000
Product Description
Copper Bonded Stainless Steel Earth Rod (Non-magetic)
SOCOME earth rod thickness of the copper layer is more than 0.254mm.
The advantages are good tensile strength more than 600N/mm²
Our ground rods can be bended through a 30 or 90 or 135 degrees angle.and the rods will be no evidence of cracking or splitting of the steel or the copper cladding.
Good in anti corrosion that usage-life is more than 50 years or more, constant low resistance and good plasticity which had the characteristics of copper as well as steel.
Our earth rods take advantage of lower resistivity soils at greater depths than normal excavation will allow, can also be used in locations with large amounts of buried services, as well as provide protection in potentially dangerous places e.g. HV switching positions.
The advantages are good tensile strength more than 600N/mm²
Our ground rods can be bended through a 30 or 90 or 135 degrees angle.and the rods will be no evidence of cracking or splitting of the steel or the copper cladding.
Good in anti corrosion that usage-life is more than 50 years or more, constant low resistance and good plasticity which had the characteristics of copper as well as steel.
Our earth rods take advantage of lower resistivity soils at greater depths than normal excavation will allow, can also be used in locations with large amounts of buried services, as well as provide protection in potentially dangerous places e.g. HV switching positions.
| Material | 99.9% Electronic Copper and Low Carbon Steel |
| Nominal Diameter | 12.7mm, 14.2mm, 16mm,17.2mm,19mm |
| Length | 1200mm,1500mm,1800mm,2100mm,2400mm,3000mm |
| Certificate | CE, ISO9001,RoSH, TUV,SGS |
| Steel Type | High Quality Q235 |
| Copper Thickness | 50Micro to 254Micron |
| Tensile Strength | 500-700N/mm2 |
| Standard | BS EN 50164-2,BS 7430 |
| Application | Grounding System |
| Process | Electroplating |
| Available service | OEM,ODM |
| Quality | Reliable |
