Audited Supplier
copper
Copper Bars
Air Condition or Refrigerator, Water Tube, Water Heater, Oil Cooler Pipe
Red Copper
Round
Non-alloy
Red
ASTM
4 - 250mm
Custom Any Length as Request
Cutting
400 Kgs
GMS
Wooden Box
as clients request
China
8307100000
Product Description
Copper Round Bar C10100 C10200 10300, C10400, C10500, C10700, C11000, C11300, C12000
| Grades | C10100, C10200, C10300, C10400, C10500, C10700, C11000, C11300, C12000, C12200, C14300, C14420, C14530, C19210, C19400 |
| Dimension Details | 4 mm to 70 mm in diameter, lengths up to 6 m |
| Round Bar Size | 0.3125" ~ 3.000" |
| Specification:- | ASTM B187, GB/T5231-2001.GB/T1527-2006.JISH3100-2006,JISH3250-2006,JISH3300-2006 |
| Standard | EN 13601: 2002 |
| Conductivity | Above 97% IACS min in Half Hard Above 99.95% in annealed |
| Purity | Copper - 99.99% |
| Specifications (OFC) | Copper: 99.99%, O 2: < 10 ppm Copper: 99.95%, O 2: < 100 ppm |
| Type | Square and any Corner Radius, Square Edge, Square Rod, Hex Bar, Hex Rod |
| ETP Copper Round Bars | |
|---|---|
| Dimension Details | 4 mm to 70 mm in diameter, lengths up to 6 m |
| Specifications (ETP) | ASTM B133, ASTM B124, ASTM B187, IS: 191, 613 & 1897 |
| Purity | Copper - 99.9% |
| Oxygen Free Copper Hex Bars | |
| Dimension Details | 4 mm to 75 mm in diameter, lengths up to 6 m |
| Hex Bar Size | 0.375" ~ 3.000" |
| Specification:- | ASTM B133, ASTM B124, ASTM B187 |
| Standard | BS, IS, AMS, DIN & All International Standards |
| DHP / DLP Copper Bars / Flats | |
| Standard | AGB/T5231-2001.GB/T1527-2006.JISH3100-2006,JISH3250-2006,JISH3300-2006, ASTMB152M-06,ASTMB187, ASTMB75M-02, ASTMB42-02, ASTMB152, B187, B133, B301,B196, B441, B465, JISH3250-2006, GB/T4423-2007,etc. |
| Size | 1 mm to 60 mm • With Sharp Edges • With Round Rdges • With full radius |
| Width | 5mm to 350mm |
| Length | Up to 6400 mm (21') |
| Available Grade : | ASTM B42, ASTM B68, ASTM B75, ASTM B88, ASTM B111, ASTM B152, ASTM B280, DIN 2.0090, BS 2870/1/5 C106, BS 2871 C106, BS 2875 C106, ENCW024A. c12200, C12000 |
| Types | Copper Bars, Flats, Rectangular, Rectangle |
| DHP / DLP Copper Square Bars | |
| Dimension Details | 4 mm to 70 mm in diameter, lengths up to 6 m |
| Specifications | ASTM B133, ASTM B124, ASTM B187 |
| Standard | EN 12167: 1998 |
| Square Bar Size | 0.375" ~ 2.500" |
| Purity | Copper - 99.85% |
| Type | square and any corner radius, square Edge, square rod |
| DHP Bar Specifications | Copper: 99.99%, O 2: < 10 ppm |
| DLP Rod Specifications | Copper: 99.95%, O 2: < 100 ppm |
| ETP Copper Square Bars | |
| Dimension Details | 4 mm to 70 mm in diameter, lengths up to 6 m |
| Specifications | ASTM B133, ASTM B124, ASTM B187, IS: 191, 613 & 1897 |
| Square Bar Size | 0.375" ~ 2.500" |
| Commercial Copper Round Bars | |
| Dimension Details | 4 mm to 70 mm in diameter, lengths up to 6 m |
| Specifications | ASTM B133, ASTM B124, ASTM B187, IS: 191, 613 & 1897 |
| Round Bar Size | 0.3125" ~ 3.000" |
| Type | Round Bar, Round Rod |
| Commercial Copper Bars/ Flats / Patta | |
| Item | Commercial Copper Bara / Flats / Patta |
| Types | Copper Bars, Flats, Rectangular, Rectangle |
| ETP Copper Bars / Flats | |
| Standard | ASTM B187 |
| Item | Copper Flats ETP |
| Size | Width up to 152.4mm (6") width |
| Standard | GB/T5231-2001.GB/T1527-2006. JISH3100-2006, JISH3250-2006, JISH3300-2006, ASTMB152M-06, ASTMB187, ASTMB75M-02, ASTMB42-02, ASTMB152, B187, B133, B301, B196, B441, B465, JISH3250-2006, GB/T4423-2007 etc. |
| Thickness | 1mm to 60mm |
| Width | 5mm to 350mm |
| Length | Up to 6400 mm (21') |
Mainly Products of Copper Bar
|
|
Copper Round Bars Chemical Composition
| Element | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Cu (1,2,3) | Pb | Zn | Fe | P | Ag | As | O | Sb | Te | |
| Min (%) | 99.99 | |||||||||
| Max (%) | 0.0005 | 0.0001 | 0.0010 | 0.0003 | 0.0025 | 0.0005 | 0.0005 | 0.0004 | 0.0002 |
(1) This is a high conductivity copper which has, in tde annealed condition a minimum conductivity of 100% IACS except for Alloy C10100 which has a minimum conductivity of 101% IACS.
(2) Cu is determined by tde difference between tde impurity total and 100 %. For alloy C10100 tde Cu value is exclusive of Ag.
(3) The following additional impurity maximum limits shall apply: Bi 1ppm (0.0001%); Cd 1ppm (0.0001%); Mn 0.5ppm (0.00005%); Ni 10ppm (0.0010%); Se 3ppm (0.0003%); S 15ppm (0.0015%); Sn 2ppm (0.0002).
