Audited Supplier
GDG
Yes
Yes
AC Three Phase
3 Phase AC Coreless Permanent Magnet Generator
300W to 10kw
100-300rpm
12-400VAC
< 1 N.M
Aluminum Alloy
ND-Fe-B
out Rotor
20 Years
OEM
GREEF
Plywood Case
Medium
China
85016100
Product Description
Coeless Permanent Magnet Generator
This Coreless Permanent Magnet always being used in vertical axis wind turbine, and other generator system which requests very low start torque and low rated rotate speed, low start wind speed, low weight and small size.
1 | Torque Patent Technology: use newest "Precise Coil" technology. No hysteresis and gear notches effect make the start torque very low <0.3N.M |
2 | Original Structure: use disc coreless motor to take place traditional motor makes it less volume and weight. |
3 | Higher Utilization: use special coreless motor technology to eliminate the use bottlenecks of lower speed wind energy. |
4 | Higher Reliability: special structure make it bigger ratio of power to volume, power to weight and have long life of 8 times longer than traditional motor. |
5 | Gearless, direct drive, low RPM generator. |
6 | High standard, quality components for use in harsh and extreme environments for wind turbines |
7 | High efficiency and Low mechanical resistance energy loss |
8 | Excellent heat dissipation due to the Aluminum alloy outer frame and special internal structure. |
Product Description
Model | GDG-0.5KW-200 | GDG-1KW-180 | GDG-1KW-200 | GDG-2KW-120 | GDG-2KW-180 |
Rated Power | 0.5KW | 1KW | 1KW | 2KW | 2KW |
Rated Rotate Speed | 200 RPM | 180RPM | 200RPM | 120RPM | 180RPM |
Rated Voltage | 56Vac | 56Vac | 56Vac | 115Vac | 115Vac |
Rated Current | 9A | 12A | 17.9A | 10A | 17.4A |
Efficiency | >85% | ||||
Wending Method | Y | ||||
Insulating Resistance | 100Mohm Min(500V DC) | ||||
Leakage Level | <5 ma | ||||
Start Torque | <0.1N/M | <0.3 N/M | <0.5 N/M | <0.3 N/M | |
Phase Type | 3 Phase | ||||
Structure | Out rotor | ||||
Stator | Coreless wire coil | ||||
Rotor | Rare Earth Permanent Magnet | ||||
Generator Shell Diameter | 320 | 380 | 550 | 450 | |
Generator Shell Length | 232 | 241 | 241 | 330 | 258 |
Weight | 20 | 32 | 32 | 75 | 51 |
Shaft drameter | 45 | 50 | 50 | 78 | 59 |
Generator shell material | Aluminum alloy | ||||
Shaft material | Carbon steel | ||||
Bearing | Deep groove ball bearing | ||||
Model | GDG-3KW-100 | GDG-3KW-180 | GDG-5KW-100 | GDG-5KW-150 | GDG-10KW-100 |
Rated Power | 3KW | 3KW | 5KW | 6KW | 10KW |
Rated Rotate Speed | 100RPM | 180RPM | 100RPM | 150RPM | 100RPM |
Rated Voltage | 380VAC | 380VAC | 380VAC | 380VAC | 400VAC |
Rated Current | 4.6A | 4.7A | 7.6A | 15.2A | 14.5A |
Efficiency | >85% | ||||
Wending Method | Y | ||||
Insulating Resistance | 100Mohm Min(500V DC) | ||||
Leakage Level | <5 ma | ||||
Start Torque | <1 N/M | <0.5 N/M | <1 N/M | ||
Phase Type | 3 Phase | ||||
Structure | Out rotor | ||||
Stator | Coreless wire coil | ||||
Rotor | Rare Earth Permanent Magnet | ||||
Generator Shell Diameter | 620 | 550 | 700 | 620 | 770 |
Generator Shell Length | 410 | 330 | 400 | 410 | 590 |
Weight | 110 | 65 | 125 | 110 | 245 |
Shaft drameter | 80 | 78 | 98 | 80 | 85 |
Generator shell material | Aluminum alloy | ||||
Shaft material | Carbon steel | ||||
Bearing | Deep groove ball bearing | ||||
System Solution
We can provide the complete generator system including Controller and Inverter:
Packaging & Shipping1. The magnetic generator use inner foam protection outer Plywooden case .Generator shaft use pipe protection.
2.Pakage size and weight please refer to our sales.
3.Shipping by sea with FCL LCL or by air .
2.Pakage size and weight please refer to our sales.
3.Shipping by sea with FCL LCL or by air .
If you have any request in package and shipping please tell our sales we will do according to your request.
Why Choose Us
Our magnetic generator is free 3 years warranty, All lifelong technical support and part cost supply.
(1) The warranty period is start from the date of shipment which show on the bill of loading or air waybill.
(2) Free maintenance services during the warranty period the cost involved be borne by the company, do not charge a fee to customers, free warranty if any damage outside the warranty period, the company will charge a fee for labor costs and materials.
(3) the warranty period, company's quality problems caused by the maintenance of the freight borne by the company, if not under warranty or man-made damage, the freight charges by the customer.
(1) The warranty period is start from the date of shipment which show on the bill of loading or air waybill.
(2) Free maintenance services during the warranty period the cost involved be borne by the company, do not charge a fee to customers, free warranty if any damage outside the warranty period, the company will charge a fee for labor costs and materials.
(3) the warranty period, company's quality problems caused by the maintenance of the freight borne by the company, if not under warranty or man-made damage, the freight charges by the customer.
