Audited Supplier
RND
Long Time Materials, Instant Materials
1580< Refractoriness< 1770
Round Neck Down
Casting Accessories
Large Casting
Steel Casting
Feeding
1.8-8.3cm
Slurry
MPa 1.5+~
30+~
Kg/G 3.5+~
1250+~
Less Than 1
Floating Beads
TdwMex
Pallet
60mm-500mm
China
68069000
Product Description
High toughness pulp fiber riser, especially suitable for the production of manual molding lines. Due to the high heat generation of the riser, the heat preservation performance is good, the feeding efficiency can reach 30%, which effectively saves steel water, and at the same time, due to the reduction of the riser size, thereby reducing the cutting and grinding costs.| specification | modulus | H | Do | do | DU | N | package | ||
| BRND60 | 1.90 | 260 | 90 | 24 | 88 | 65 | 57 | 33 | / |
| BRND70 | 2. 15 | 380 | 100 | 25 | 94 | 73 | 59 | 35 | / |
| BRND80 | 2.20 | 420 | 100 | 27 | 100 | 78 | 75 | 39 | 22 |
| BRND100 | 2.70 | 1000 | 150 | 50 | 130 | 98 | 85 | 55 | 14 |
| BRND120 | 3.20 | 1410 | 150 | 50 | 158 | 120 | 98 | 60 | 8 |
| CRND150 | 3.71 | 2780 | 192 | 68 | 192 | 146 | 120 | 74 | 6 |
| CRND180 | 4.33 | 4440 | 222 | 90 | 222 | 175 | 135 | 88 | 1 |
| CRND200 | 4.93 | 6540 | 250 | 100 | 250 | 200 | 150 | 100 | 1 |
| CRND225 | 5.54 | 9320 | 278 | 110 | 278 | 225 | 160 | 113 | 1 |
| CRND250 | 5.99 | 12960 | 310 | 120 | 310 | 252 | 180 | 126 | 1 |
| CRND275 | 6.43 | 16370 | 340 | 130 | 330 | 278 | 200 | 147 | 1 |
| CRND300 | 7.08 | 21310 | 360 | 140 | 360 | 300 | 210 | 150 | 1 |
| *This table ONLY show the standard models. Customer-specific can be accepted. | |||||||||
Q: Are you Factory?
A: Definitely, we are a factory.We specialized in exothermic and insulation sleeves and slag remover.
Q: What Parameters should I provide to you for a proper quotation?
A: Application, pore size, dimension, color, quantity, packing requirements, trade terms.
Q: How can you control your quality?
A: For each production processing, we have a complete QC system for the chemical composition and physical properties. After production, all the goods will be tested, and we have the quality certificates with ISO9001:2015.
Q: What is your lead time?
It usually needs about 5-10 days after receiving the PO.
Q: Do you provide Samples?
A: Yes, our factory provides samples for testing, please send detailed parameters to us. (if customized, withdrawing is best) The samples will be charged or free according to the specific requirements.
Q: What are the Payment Terms?
A: We accept T/T, L/C, West Union, etc.
Q: How can I get samples?
A: We are honored to offer you the samples.
Q: What about your Packing?
A: We provide carton boxes, pallets, etc. OEM packing is available too.
Q: Do you have R&D services?
A: Yes, we have an R&D department to assist you in new product development.
Q: Does your company accept customization?
A: We accept OEM service.
Q: Can we visit your company?
A: Yes, you are welcome to visit our company.
