Audited Supplier
TT Crystal 14
Lighting, Medical, Optical, Photography
Cyrstal
>95%
Single-lens
Optical Glass
Clear
ISO9001
Customized
HC
1 Unit
L/C, T/T, D/P, Western Union, Paypal, Money Gram
as Required
40-20 or Better
Yes
1arc Minutes
Protective Bevel as Needed
400nm-700nm
TT
Carton, Blister, Customized
As required
Tianjin
9001909090
Product Description
Cr:YAG+Nd:YAG Diffusion Bonded Crystal for Laser Applications
Diffusion-bonded,that is:First,after a series of surface treatment two crystal close together to form the optical cement at room temperature and then heat-treated crystal to form a permanent bonded without the case of other binders.Experiments shows that when the Non-depoed DBC crystal as end caps at both ends of the same matrix doped crystal,the end face temperature rise is very small,close to coolant temperature ,a decrease of thermal lens effect and the distortion of the end face caused by thermal-induced wavelength shift of light split coated,is conducive to the stability of lasers and high-power laser operation.This bonding technology in laser applications can not only greatly improve the laser performance and beam quatily,but also conducive to the intergration of laser systems and access to large-size crystal.
Manufacturing accuracy of Diffusion-bonded Crystals or according to customer's need
Application field
Factory:
Tianjin Tengteng Optoelectronic Technology Co., Ltd. was established in 1995, focused on production, research and sales of precision optics. We have professional engineers to research and develop, and design all kinds of lens.
Other Lenses Handle
Optical Lens Design
Lens assembly and debugging
Packaging& Shipping
Package detail:
Inside Packing: Special protective packing for optical products
Outside Packing: Carton
Packing can be made according to customer's need
Payment Term:
T/T,Western Union,Paypal,L/CCustomer Question & Answer
2.What's your minimum order quantity?
1 unit.
3.What's your payment term?
T/T,Letter of Credit, Western Union etc.
4.Could I get free samples before making an order?
Your samples fee will be refunded when you place a large order.
5.Do you have professional person to design according to my requirement?
Of course, we have R&D department to work with you and provide you the best service until you will be satisfactory.
6. What's the lead time?
It is up to your quantity and specification and our stock.
Your products will be sent within 2 days once you make payment for the stock products.
7. Do you have enough stock?
Sure. We have enough stock because our factory is in this area for over 20 years.You can contact our salesperson to get stock at any time.
8. Can you accept OEM or ODM?
Yes, we accept all OEM and ODM.
9. Do you give a warranty of your products?
Yes, if there is a quality problem, you can contact us by email or skype or whatsapp, we can give you the solution in time. We will rework or provide the replacements to you at our cost according to actual conditions.
Diffusion-bonded,that is:First,after a series of surface treatment two crystal close together to form the optical cement at room temperature and then heat-treated crystal to form a permanent bonded without the case of other binders.Experiments shows that when the Non-depoed DBC crystal as end caps at both ends of the same matrix doped crystal,the end face temperature rise is very small,close to coolant temperature ,a decrease of thermal lens effect and the distortion of the end face caused by thermal-induced wavelength shift of light split coated,is conducive to the stability of lasers and high-power laser operation.This bonding technology in laser applications can not only greatly improve the laser performance and beam quatily,but also conducive to the intergration of laser systems and access to large-size crystal.
Manufacturing accuracy of Diffusion-bonded Crystals or according to customer's need
| dopant concentration | 0.5%-3% |
| Section(mm) | 2×2-10×10 |
| length(mm) | 1-30 |
Application field
Factory:
Tianjin Tengteng Optoelectronic Technology Co., Ltd. was established in 1995, focused on production, research and sales of precision optics. We have professional engineers to research and develop, and design all kinds of lens.
Other Lenses Handle
Optical Lens DesignLens assembly and debugging
Packaging& Shipping
Package detail:
Inside Packing: Special protective packing for optical products
Outside Packing: Carton
Packing can be made according to customer's need
Payment Term:
T/T,Western Union,Paypal,L/C
Customer Question & Answer
1. Are you a manufacturer or trader? Can I visit your factory or office? How to see your factory on line?
We are a manufacturer in Tianjin, China.You are welcome to visit our factories and offices at any time.We have a video to show you our factory in detail.
2.What's your minimum order quantity?1 unit.
3.What's your payment term?
T/T,Letter of Credit, Western Union etc.
4.Could I get free samples before making an order?
Your samples fee will be refunded when you place a large order.
5.Do you have professional person to design according to my requirement?
Of course, we have R&D department to work with you and provide you the best service until you will be satisfactory.
6. What's the lead time?
It is up to your quantity and specification and our stock.
Your products will be sent within 2 days once you make payment for the stock products.
7. Do you have enough stock?
Sure. We have enough stock because our factory is in this area for over 20 years.You can contact our salesperson to get stock at any time.
8. Can you accept OEM or ODM?
Yes, we accept all OEM and ODM.
9. Do you give a warranty of your products?
Yes, if there is a quality problem, you can contact us by email or skype or whatsapp, we can give you the solution in time. We will rework or provide the replacements to you at our cost according to actual conditions.
