Audited Supplier
Cross Reference Standard Breather DC-4
Desiccant Breathers Protect Diesel Fuel Storage Reservoirs, Gearboxes, Pumps And Other Industrial Equipment From Moisture And Particulate
The breathers provide simple, yet dependable protection from moisture and particulate contamination in lubricants and equipment across multiple industries and applications. These versatile breathers are five times more effective than the leading non-desiccant breathers, providing optimal defense against humidity for your applications.
SIZING / Cross Reference :
| Part Nmber | Unit Height(mm) | Unit Width(mm) | Repace Des Case | Replace TTI | Replace XCLUDE |
| SFT-SDC-1 | 134.9 | 64.1 | DC-1 | TT-1 | LEXS375-28 |
| SFT-SDC-2 | 155.6 | 101.6 | DC-2 | TT-2 | LEXS1-66 |
| SFT-SDC-3 | 206.4 | 101.6 | DC-3 | TT-3 | LEXS1-122 |
| SFT-SDC-4 | 257.2 | 101.6 | DC-4 | TT-4 | LEXS1-188 |
| SFT-SDC-BB | 99.06 | 64.1 | DC-BB | TT-BB | LEXS375-13 |
Our unique design features a longer body, which permits 10% greater volume of silica gel desiccant beads when compared to leading competitors.
Advanced Silica Gel
Desiccant removes water from air prior to it entering your system, tank or equipment.
Built-In Status Indication
Desiccant gel changes color from blue to pink to indicate that it is removing moisture, as well as when to replace the breather.
Step Up To Superior Protection
This breather unit is a marked improvement over the customary dust caps or OEM breathers on equipment. When contaminated air enters the top of the breather, it passes through layered filter media, preventing solid particles from entering the breather and causing undue wear to your equipment surfaces. Filtered air passes through a bed of Sinft-Dri™ silica gel, which removes harmful moisture from the air. The silica beads also work to attract moisture from inside the equipment reservoir during service or shut-down, keeping the equipment dry. The addition of check-valves in our CV breather is ideal for low-flow and intermittent operations in high humidity conditions.
Standard breathers provide simple, yet dependable protection from moisture and particulate contamination in lubricants and equipment across multiple industries and applications. These versatile breathers are five times more effective than the leading non-desiccant breathers, providing optimal defense against humidity for your applications.
For example, a gearbox for wind power generation:
GearboxGearboxes in wind turbines differ from those in high-speed machinery In industrialgearboxes, the progress of failure can occur in weeks, days, or even hours. In windturbines, the impact of contaminants on slower turning gear drives is slow andinsidious. Nevertheless, the mean time between failure(MTBF)for gears andshaft-support bearings can be increased by as much as two to three times by maintaining optimum levels of fluid cleanliness and dryness.
