Audited Supplier
Curtis Permanent Magnet DC Motor Controller 24-48V 70A for Forklift Electric Vehicles Parts 1222-5101
| Product nume | DC Motor Controller | Car Fitment | Electric Sightseeing Bus lifted Golf Cart forlift etc. |
| Voltage Options | 24V | Current | 70A |
| Model | 1222-5101 | Storage temperature | -40°C to +50°C |
| Color | Original Color | Type | DC Motor Controller |
| Size | 13X16X6 cm | Single gross weight | 0.5kg |
| MOQ | 10 PCS | Port | Ningbo/Shanghai |
Curtis motor controller 1222-5101
The Curtis Model 1222 is an AC induction motor controller for 'steer by wire' electric power steering systems. In these systems, the steering motor functions as an actuator to change the angle of the vehicle's steered wheel(s) and so change the direction of travel. The Model 1222 performs as the steering system controller, interpreting the steering command input and wheel position feedback, then driving the steering motor to move the steered wheel to the desired position. Designed for use as an electric power steering controller for 300-1400W AC induction gearmotors with overall gear reductions between 50:1 and 800:1.
Key Features:
Absolute Position (pedestrian stacker) or Relative Position (reach truck) control modes.
Supports >360° multi-turn steering mode.
Indirect Field Orientation (IFO) vector control algorithm provides maximum possible torque while ensuring maximum efficiency and accurate current control.
16 kHz PWM switching frequency ensures silent operation across the 0-200 Hz stator frequency range.
Advanced PWM techniques produce low motor harmonics, low torque ripple, and minimized heating losses, resulting in high efficiency.
70A RMS 2 minute current output.
Q1.Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. Do you have any MOQ limit?
A: Small quantity is accepted , but we offer quantity discount.
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q4. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q5. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production and Shipping.
