Audited Supplier
0.35-10
Non Sterilization
Disposable
Clinical
Metal
ISO13485
Without Power
Adult
Super Elastic Nitinol Tube
Sandblasting, Polishing, Knurling, Laser Marking,
0.45-10mm
0.05-3mm
or Customized
Astmf2603
Super Elastic & Shape Memory
Tube/ Pipe
Inner Package: Coil or Spool; Outer Package: Carto
CIS
Carton
be customized
China
Product Description
Product Description
Nitinol Tubes Production Process:
FAQ
Are you a trading company or a factory?
A: We are a factory, we are the factory with our own production line and inspection and control process with ISO9001 and ISO13485 quality management system.
Q: What are your technical advantages?
A: We always focused on medical device components, mainly on wire, cable, tube, needle and standard products etc. Also we have completely manufacture machines and process basing on medical requirements. Our team have had strong experience on the design and manufacturer of medical components
Q: Do you need drawings for quotation and production?
A: Yes, all of products to be customized. We need either drawings or samples. 3D data will be better. We need your all requirements with your products as our input.
If only sample, our engineer team will make out a technical drawing for your confirmation according to your request before mass to production.
Q: What are your terms of payment?
A: For new order, we can accept 50% T/T in advance, balance before shipment. And we can communicate more payment term with you by the future order.
| Product Name | Medical Nitinol Nickel Titanium Alloy Tube |
| Size | be customized |
| process | melting-forging-hot piercing - cold rolling- pickling etc. |
| Surface treatment | Polishing, electroplating, zinc plating, laser marking, etc. |
| Assembly part | plastic and metal handle |
| Material | nitinol |
| Application | Medical use, medical equipment. |
Nitinol Tubes Production Process:
A method for producing and processing titanium tubes, the processing method is as follows:
Step 1: Forging the titanium ingot into a tube blank, and performing surface treatment on the tube blank;
Step 2: After the surface treatment, the tube blank is rolled into a titanium tube for the first time, and the oil is removed after the first rolling;
Step 3: Carry out the first pickling after degreasing, wash the titanium tube after pickling, dry it after washing, annealing after drying, and straighten the titanium tube after annealing;
Step 4: Pickling the titanium tube again. After the pickling, rinse the titanium tube, dry the titanium tube after washing, and then roll the titanium tube for the second time after drying. The rolled titanium tube The finished product is degreasing, pickling after degreasing, washing the titanium tube after pickling, washing and drying, annealing after drying, and straightening the titanium tube after annealing;
Step 5: Pickling the titanium tube after straightening, repeat the above steps, and obtain the finished product after six times of rolling.
Step 1: Forging the titanium ingot into a tube blank, and performing surface treatment on the tube blank;
Step 2: After the surface treatment, the tube blank is rolled into a titanium tube for the first time, and the oil is removed after the first rolling;
Step 3: Carry out the first pickling after degreasing, wash the titanium tube after pickling, dry it after washing, annealing after drying, and straighten the titanium tube after annealing;
Step 4: Pickling the titanium tube again. After the pickling, rinse the titanium tube, dry the titanium tube after washing, and then roll the titanium tube for the second time after drying. The rolled titanium tube The finished product is degreasing, pickling after degreasing, washing the titanium tube after pickling, washing and drying, annealing after drying, and straightening the titanium tube after annealing;
Step 5: Pickling the titanium tube after straightening, repeat the above steps, and obtain the finished product after six times of rolling.
FAQ
Are you a trading company or a factory?
A: We are a factory, we are the factory with our own production line and inspection and control process with ISO9001 and ISO13485 quality management system.
Q: What are your technical advantages?
A: We always focused on medical device components, mainly on wire, cable, tube, needle and standard products etc. Also we have completely manufacture machines and process basing on medical requirements. Our team have had strong experience on the design and manufacturer of medical components
Q: Do you need drawings for quotation and production?
A: Yes, all of products to be customized. We need either drawings or samples. 3D data will be better. We need your all requirements with your products as our input.
If only sample, our engineer team will make out a technical drawing for your confirmation according to your request before mass to production.
Q: What are your terms of payment?
A: For new order, we can accept 50% T/T in advance, balance before shipment. And we can communicate more payment term with you by the future order.
