Audited Supplier
spring loaded connector are offered with a flat or concave surface for mating with our standard0.48 dia spring pin plungers. The target connectors provide and excellent gold coating conductive patch back to the board mount spring pin connector.
BASIC PARAMETERS
Material | |
Plunger | Brass |
Tube | Brass |
Spring | Stainless Steel Wire |
Housing | High Temp. Thermal Plastics |
Plating Finish | |
Plunger | 0.4um Hard Gold over Nickel underplate |
Tube | 0.1um Hard Gold over Nickel underplate |
Mechanical Performance | |
Spring Force | 40-80gf ( Depend on design) |
Durability | 20,000 Cycles Min. |
Electrical Performance | |
LLCR | 30mOhm Max. ( Dynamic LLCR) |
Current Rating | 1.0A continuous, Peak1.5A ( Depend on design) |
DIMENSION
Please give us your size requirements, especially the working range of the spring pin,we will give you best choice.
ELECTRICAL CHARACTERISTICS
1. Voltage: 36VDC Max. or 150 VDC/100 VRMS
(Temperature Rise VS Current Rating) 30 °C Max.
2. Insulation Resistance 1000 M ohm Min. at 500 VDC
3. Dielectric Withstanding Voltage 500VAC 1 minute between adjacent contact
Capacitance between two adjacent contacts 1 pF Max.
ENVIRONMENTAL CHARACTERISTICS
1. Operating Temp. -40 °C to +85 °C
2. Storage Temp. -40 °C to +85 °C
3. Solderability solder coverage area Min.95%
4. Salt Spray Corrosion 48-96 Hours
5. Resistance to Solder heat 2 Cycles Reflow@ Peak 260 °C 20S
6. Humidity 96 hours @ 93% R.H. 40 °C
7. Temperature Life 105°C 96hrs
ENVIRONMENT PROTECTION
1. Compliance RoHS
2. Compliance REACH
PACKAGING
Tape & Reel packaging acc. To EIA 481 standard
Moisture proof packaging for moisture sensitive MSL2 and MSL3 connector.
