Audited Supplier
PE sheet
PE
PE
0.1%~0.3%
＜0.4%
30~40MPa
0.94 - 0.98 g/cm3
1---200mm
Clear, Red, White, Yellow, Orange, Black, etc
Molded and Extruded
Yingchuang
Pallets
1000*2000mm or 1220*2440mm or 1500x3000mm
China
39205100
Product Description
HDPE sheet has an almost waxy feel to it and is pretty good at being a low friction wear strip material and is used probably more than any other plastics as a wear strip on conveyors or production liners of huge companies. While is difficult to bond effectively to anything, which means that HDPE sheet will need to be physically or mechanically fixed in place using screws etc.Characteristics: Excellent chemical resistance; good wear resistance; Anti-weather and Anti-Aging; Good electrical insulation ; UV Resistance; Stain resistant; Good protection against stress cracking; Very low water absorption; Moisture resistant; Low maintenance cost; Resists organic solvents, degreasing agents& electrolytic attack; High flexibility at high or low temperature; The machanical strength of surface hardness, stretching intensity and rigidity is higher than LDPE. Food safe. Non-Toxic and smell.
| HDPE extruded plastic sheet | |||
| Regular size/mm | |||
| 1000 × 2000mm/ 1220 × 2440 mm/1500 × 3000mm or customize as request | |||
| Thickness | |||
| 1-200mm | |||
| Color | |||
| White,Black,Green,Blue,Yellow,Gray and so on | |||
| PROPERTIES | VALUES | ||
| Materials | Polyethene | ||
| Density | 0.96-1 g/cm³ | ||
| Production Process | molded and extruded | ||
| Average molecular weight | 9.2×106 g/mol | ||
| Tensile strength (23ºC in air) | 22 MPa | ||
| Breaking strength | 42 MPa | ||
| Tensile strain at break | 600% | ||
| Charpy impact strength (notched) | No break | ||
| Ball indentation hardness | 42 N/mm2 | ||
| Shore D hardness | D65 | ||
| Abrading(sand slurry experiment) | 100 | ||
| Coefficient of Friction | 0.09~0.1 | ||
Applications
1.Food storage and freezing equipment.
2.Cutting boards, kitchen counters, kitchen shelves.
3.Protective surface in the food processing industries.
4.Acid and alkali resistant equipment,environmental protection equipment.
5.Water tank, washing tower, waste water, waste gas discharge, water treatment equipment.
6.Chemical containers,medicine and food packaging.
7.Machinery, electronics, electrical appliances, decoration and other fields.
8.Clean room, semiconductor plant and related industrial equipment Gas transportation, water supply,drainage,agricultural irrigation.
9.Pump and valve components, medical appliance parts, seal, cutting board. sliding profiles.
10.Outdoor recreational facilities and Indoor house furniture.
Sound Barrier Toilet Partition, Partition Board and FurnitureRainbow chairs.
