Customized Wire Mesh Demister Pad

Price $400.00 Compare
Min Order 1 Piece
Availability In Stock
Shipping From Jiangsu, China
Popularity 380 people viewed
Quantity
+-
 

Suzhou Wojun Environmental Protection Technology Co., Ltd.

VIP   Audited Supplier 1 year
Profile Certified by SGS/BV
Round Mesh Pad Demister
Metal
Bunk
Liquid Filter, Air Filter
Filter Elements
Customized
Multilayered
σ B (MPa) ≥ 515-1035
1398-1454
50-145kg/Cubic Meter
7.93
≤ 201hbw ≤ 92hrb ≤ 210hv
WOJUN
Wooden Box
SP DP HR HP
China
8421299090
Product Description
 

 

Customized Wire Mesh Demister Pad


Description
Wire Size:Customer OrderMesh Thickness:As Per Customer Design
Mesh Density:193, As Per RequirementMaterial:SS304 316 316L
Grid Material:As Per Customer RequirementSize:As Per Design
High Light:

316 ss wire mesh demister

, 

standard iso wire mesh demister

, 

ss 316l demister mesh

 

 

0.25mm SS304 316 316L Wire mesh demister pad made for low pressure rectifying column

 

Low pressure rectifying column:

 

The wire mesh demister pad increases the purification ratio, that enables a deep cut in residue oil to improve the quality of gas oil. The improved gas oil contains less carbon, asphalt and corrosive metals, increases decomposition capacity by the residue load in the regenerator, and maintains a higher contact reaction to produce a higher gasoline yield ratio.

 

Wire Mesh Demister Standard Specification (part):

 

2.2 construction

A. The demister shall be fabricated as a whole or as the minimum number of sections required to be inserted into the vessel manhole.

B. The mesh gasket shall closely cooperate with the gasket sealing system.

C. The thickness of mesh bedding shall not exceed 9 inches (230 mm). If more than one layer is required, the joints shall be staggered.

D. The integrated circular mesh pad can be spiral.

2.3 supports and gratings

A. In addition to the customer's requirements, the general layout of the demister support and grille shall comply with the factory practice.

B. The mist eliminator supplier can also provide final details of the mist eliminator support and compression grille.

C. The demister supplier shall provide details of the components attached to the vessel to the vessel manufacturer in a timely manner for installation without changing the vessel manufacturing progress.

D. Each part of the mesh mat shall include a grid on each side.

E. G-type mesh mats shall be provided with inlet and outlet rigid welded gratings. The outlet grille and blanket outlet area of the G-type mesh mat shall be clearly marked with "outlet".

F. Spiral mesh mats shall include an x-mesh on both sides.

2.4 fastening device

As a mist eliminator manufacturer, we can provide ties or other devices to fix the mist eliminator part to the bracket, connect the grille to its container bracket, and fix the layers together if multiple layers of mist eliminators are required.

Wire Mesh Demister Styles:

 

StyleMaterial

Density

lb/ft3 (kg/m3)

Wire Diameter

Inches (mm)

AMetallic9 (144.2)0.011 (0.28)
BMetallic5 (80.1)0.011 (0.28)
CMetallic12 (192.2)0.011 (0.28)
D

Polytetrafluroethylene

(PTFE)

normal0.012 (0.30)
FPolypropylenenormal0.012 (0.30)
GMetallic

Variable

5 (80.1) - 9 (144.2)

0.011 (0.28)
VMetallicOthernormal

 

Where are DEMISTER units used?

 

Knockout drums and separators - save on capital costs by decreasing vessel size-recover costly fatty acids from stream-reduce compressor maintenance by preventing scale build-up.

Absorbers - reduce overhead losses of glycols in dehydrators to no more than 0.1 gal/MMSCF natural gas-cut losses of absorption oil and amines in CO2 systems.

Scrubbers - reduce chemical discharges from Kraft mill smelt dissolver tank to less than 0.11 kg/dry ton (0.25 lb/dry ton) of pulp-improve scrubber efficiency by removing particulates carried in entrained liquids.

Distillation columns - improve product purities and increase throughput capacities for petrochemicals, organic intermediates, fine chemicals.

Evaporators - prevent carryover loss of valuable products, keep condensate TDS <10 ppm for highest quality boiler feed water-clean up vacuum ejector stream discharge-lower maintenance in vapor re-compression systems.

High pressure steam systems - provide dry steam- cut TDS to <10 ppb in condensate-eliminate build-up on turbine blades.

Refinery towers - increase throughput capacity-take deeper cuts for greater product yields - prolong catalyst life in downstream cracking and reforming units by reducing carbon and metals in side

draws-use lower grade crudes.

 
Free design and drawing service welcome to contact us.


  • Contact Supplier
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA  
$305.00 1 cube meter(MOQ)

Metal Pall Ring 304 316L Stainless Steel Ring Price for Distillation Column Tower

Suzhou Wojun Environmental Protection Technology Co., Ltd.
$50.00 1 Roll(MOQ)

Stainless Woven Mesh Factory China Stainless Steel Mesh Wire Thickness Mesh Gauge Stainless Steel Wire Mesh

Suzhou Wojun Environmental Protection Technology Co., Ltd.
$100.00 1 Piece(MOQ)

Best Price Metal Vane Type Pack Mist Baffle Demister Mist Eliminator for Tower

Suzhou Wojun Environmental Protection Technology Co., Ltd.
$50.00 1 Roll(MOQ)

SS304/316 60 120 Mesh Stainless Steel Metal Woven Wire Mesh for Filter/Sieve/Screen

Suzhou Wojun Environmental Protection Technology Co., Ltd.
$3.00 100 Pieces(MOQ)

5 10 Micron Filter Mesh Pack AISI 304 316 Stainless Steel Disc Filters Micron Strainer

Anping County Huana Wire Mesh Products Co., Ltd.
$0.30 2000 Pieces(MOQ)

Fire Resistant Polyurethane Gutter Guard Filter Foam

Dongguan Dihui Foam Sponge Co., Ltd.
$4.32 10 pieces(MOQ)

Good Electromagnetic Shielding and Noise Absorption Function 10-150 Ppi Copper Foam

Hebei Aegis Metal Materials Co., Ltd.
$50.00 10 Pieces(MOQ)

TEC-SIEVE Crimped Woven Wire Mesh/Vibrating Screen Mesh/Hook Mining Screen Mesh

Hebei Tec-Sieve Wire Mesh Products Co., Ltd.
$1.85 100 Pieces(MOQ)

40um 50 30 100 Micron Cylinder Shape Stainless Steel Mulit-Layers Wire Mesh Filter Tube

Hebei Aegis Metal Materials Co., Ltd.
$20.00 10 Square Meters(MOQ)

High Quality Nylon Polyester Mesh for Printing Filter Mesh

Riqi ( Hangzhou ) Filter Technology Co., Ltd.