Audited Supplier
CW61180L CW61200L
Horizontal Lathe
Plate, Shaft, Pipes
Horizontal Guide Rail
Single Turret
Electric
Artificial
Semiautomatic
Floor-type
Precision
CE, ISO 9001
New
Swing Dia.Over Bed 1800mm 2000mm 2500mm
preciion
Wooden Case
CE
Dezhou, Shandong, Pr. China
84581900
Product Description
CW61180L-CW61200L-CW61250L
These lathes can perform to turn end-faces,cylindricl surfaces and internal holes of various parts as well as metric,inch,module and pitch threads.The top slides can be operated individually by power for cutting short taper surface also ,can be turned automatically through the compound movement combining longitudinal feed with the top slide feed,moreover,the machines may be used for drilling,boring and trepanning.They are characteristics of power,high spindle speed,high rigidity.The various ferrous and non-ferrous metals parts may be turned through the heavy cutting by carbon alloytools.
Main Specifications and Features
Stand Accessories
1. 1600mm four-jaw chuck for CW61180L and CW61200L, 1800mm four jaw chuck for CW61250L 2. steady rest: 400--700mm(for more than 2m) 3.. Morse No.6 Center, 4. center sleeve 5. Tools 6. foundation bolts and screws
Special Accessories
1. Metric chasing dial device2. Inch chasing dial device3. Inch leadscrew 4. levelers, 5.1800mm, 2000mm four jaw chuck, 6.roller support (opened steady rest), 7. 700-1000mm steady rest
These lathes can perform to turn end-faces,cylindricl surfaces and internal holes of various parts as well as metric,inch,module and pitch threads.The top slides can be operated individually by power for cutting short taper surface also ,can be turned automatically through the compound movement combining longitudinal feed with the top slide feed,moreover,the machines may be used for drilling,boring and trepanning.They are characteristics of power,high spindle speed,high rigidity.The various ferrous and non-ferrous metals parts may be turned through the heavy cutting by carbon alloytools.
Main Specifications and Features
| SPECIFICATION | Model | ||
| CW61180L CW62180L | CW61200L CW62200L | CW61250L CW62250L | |
| Max.swing diameter over bed | 1840 | 2040 | 2500 |
| Max.swing diameter over crossslide | 1450 | 1650 | 2000 |
| Max.swing diameter over gap | 2300 | 2400 | 2900 |
| Width of bed | 1100mm | ||
| Max.length of workpiece | 1000 -16000mm | ||
| Spindle nose | A15 | ||
| Sindle bore diameter | 130mm | ||
| Taper of spindle bore | Metric No.140# | ||
| Range of spindle speed | 3.15-315r/min 21kinds | ||
| Longitudinal feeds range | 0.1-12mm/r 56 kinds | ||
| Transversal feeds range | 0.05-6mm/r 56kinds | ||
| Metrec thread range | 1-120mm 44kinds | ||
| Inch thread range | 3/8-28TPI 31kinds | ||
| Module thread range | 0.5-60mm 45kinds | ||
| Pitch thread range | 1-56TPI 25kinds | ||
| Tailstock sleeve taper | Metric 80# | ||
| Tailstock sleeve diameter | 260mm | ||
| Tailstock sleeve travel | 200mm | ||
| Main motor power | 30kW | ||
| Rapid motor power | 1.5kW | ||
| Coolant pump power | 0.125kW | ||
1. 1600mm four-jaw chuck for CW61180L and CW61200L, 1800mm four jaw chuck for CW61250L 2. steady rest: 400--700mm(for more than 2m) 3.. Morse No.6 Center, 4. center sleeve 5. Tools 6. foundation bolts and screws
Special Accessories
1. Metric chasing dial device2. Inch chasing dial device3. Inch leadscrew 4. levelers, 5.1800mm, 2000mm four jaw chuck, 6.roller support (opened steady rest), 7. 700-1000mm steady rest
