Audited Supplier
CW61800H CW61200H
Horizontal Lathe
Plate, Shaft, Pipes
Horizontal Guide Rail
Single Turret
Electric
Artificial
Semiautomatic
Floor-type
Precision
CE, ISO 9001
New
Swing Dia.Over Bed 1800mm 2000mm 2500mm
preciion
Wooden Case
CE
Dezhou, Shandong, Pr. China
84581900
Product Description
CW61180H CW61200H
These lathes can perform to turn endfaces ,cylindrical surfaces and internal holes of various parts as well as metric, inch ,module and pitch threads. The top slides can be operated individually by power for cutting short taper surface also. It also can be turned automatically through the compound movement combining longitudinal feed with the top slide feed. Moreover ,the machines may be used for drilling ,boring and trepanning. The are characteristics of power ,high spindle speed and high rigidity. The various ferrous and non-ferrous metal parts may be turned through the heavy cutting by carbon alloy tools.
Main Specifications and Features
Stand Accessories
1. Φ 1600mm heavy chuck.
2. steady rest Φ400--700mm, 2-8m is mated with 1set and 9-12m is 2 sets and 13-16m is 3 sets.
3. Morse No.6 Center 1set
4. center sleeve 1set
6. tools 1set
7. Foundatin bolts 1 set
8. foundation screws 1set
Special Accessories
1 Φ 1800mm Φ2000mm four jaw chuck
2 steady rest Φ400-700mm, steady rest Φ700-1000mm steady rest.
3 Roller support (opened steady rest)
4 NSK spindle bearing
5 levelers
These lathes can perform to turn endfaces ,cylindrical surfaces and internal holes of various parts as well as metric, inch ,module and pitch threads. The top slides can be operated individually by power for cutting short taper surface also. It also can be turned automatically through the compound movement combining longitudinal feed with the top slide feed. Moreover ,the machines may be used for drilling ,boring and trepanning. The are characteristics of power ,high spindle speed and high rigidity. The various ferrous and non-ferrous metal parts may be turned through the heavy cutting by carbon alloy tools.Main Specifications and Features
| SPECIFICATION | Model | ||
| CW61180H | CW61200H | ||
| Max.swing diameter over bed | 1840 | 2040 | |
| Max.swing diameter over crossslide | 1450 | 1650 | |
| Width of bed | 1100mm | ||
| Max.length of workpiece | 1000 -16000mm | ||
| Max. loading weight between centers | 15 tons | ||
| Spindle nose | A15 | ||
| Sindle bore diameter | 130mm | ||
| Taper of spindle bore | Metric No.140# | ||
| Range of spindle speed Dia. of front inner bearing of spindle | 3.15-315r/min 21kinds 3.5-290r/min 12 kinds 240mm | ||
| Longitudinal feeds range | 0.1-12mm/r 56 kinds | ||
| Transversal feeds range | 0.05-6mm/r 56kinds | ||
| Metrec thread range | 1-120mm 44kinds | ||
| Inch thread range | 3/8-28TPI 31kinds | ||
| Module thread range | 0.5-60mm 45kinds | ||
| Pitch thread range | 1-56TPI 25kinds | ||
| Tailstock sleeve taper | Metric 80# | ||
| Tailstock sleeve diameter | 280mm | ||
| Tailstock sleeve travel | 300mm | ||
| Main motor power | 30kW | ||
| Rapid motor power | 1.5kW | ||
| Coolant pump power | 0.125kW | ||
1. Φ 1600mm heavy chuck.
2. steady rest Φ400--700mm, 2-8m is mated with 1set and 9-12m is 2 sets and 13-16m is 3 sets.
3. Morse No.6 Center 1set
4. center sleeve 1set
6. tools 1set
7. Foundatin bolts 1 set
8. foundation screws 1set
Special Accessories
1 Φ 1800mm Φ2000mm four jaw chuck
2 steady rest Φ400-700mm, steady rest Φ700-1000mm steady rest.
3 Roller support (opened steady rest)
4 NSK spindle bearing
5 levelers
