Audited Supplier
CWB13 tuning fork level switch
Tuning Fork
All in One
1 Year
CE
SS304
-20℃~80℃
Single Item
1.000kg
OEM
Shanghai, China
G1/2/NPT 1/Flange/Sanitary
4MPa
-20...80c/200c
M12XP1.0/DIN or Customize
Cwb13 Vibrating Tuning Fork Level Switch
Liquid, Powder or Granular Solid
18~36VDC/85~250VAC
Ziasiot
China
Product Description
Description:
The company's CWB13 Series Tuning fork level switch is tuning fork by piezoelectric crystal and inherent frequency of tuning fork. It can monitor continuously to the change of frequency. When the tuning fork switch is used for low alarm (or low position control), the medium in the vessel is discharged downward passing through the tuning fork. When it is lower than the specific location and change the inherent frequency, this change is detected by electronic component, the output state is shifted; when it is used for high alarm (or high position control), the medium in the vessel go upward and contact with tuning fork which can shift the output state. changes, these changes are detected by the intelligent circuit, and converts it into a switch signal.
Features:
Features:
High adaptation: no influence on electrical parameter and density of medium, suitable for various conditions. Scaling ,stir, turbulent flow, bubble ,vibration, middle viscosity, high pressure, high temperature etc. No calibration: no need for calibration on spot since no impact on electrical parameter and density of medium. Maintenance-free: no moving parts, no need to maintain after installation. Various Power supply: he vibrating fork level switch is 20~250VAC, 20~60VDC,Suitable for all Power supply place. Various Connection: The level switch with flange and thread connection for you reference.
Application:
Whatever feed,mud and drive or pulp,glue and dye.the level switch is suitable Water, mineral water Waste water, sewage, slurry, acid alkali solution Beer, beer starter culture, juice, beverage Paper pule, glue,dye,solid power and other similar good mobility materials Diesel and other similar dangerous liquids/ hazardous conditions.
Whatever feed,mud and drive or pulp,glue and dye.the level switch is suitable Water, mineral water Waste water, sewage, slurry, acid alkali solution Beer, beer starter culture, juice, beverage Paper pule, glue,dye,solid power and other similar good mobility materials Diesel and other similar dangerous liquids/ hazardous conditions.
Power | 18~36VDC /85~250VAC |
Output | 3A/250VAC SPDT/NPN/PNPcan be set independently |
Particle size | ≤10mm |
Temperature | -20···80°C /200°C/500°C |
Pressure Range | ≤4MPa |
Material | SUS304+PTFESpecial design |
Application | Liquid, powder or granular solid |
Liquid viscosity | <1000mm²/s |
Process Connection | G1/2" / NPT 1''/Flange/Sanitary |
E-Connection | M12xP1.0 / DIN or customize |
Q: What is the warranty of your products?
A: 1 years from shipment date
Q: What is your shipping method?
A: Small orders are delivered with DHL, FedEx, TNT, UPS , EMS. Large orders are recommended to ship by sea or air.
Q: How long will you give me the reply?
A: We can support you 24Hours online service via email, skype, what'sapp, facebook etc within 1 hour.
Q: Are you trading company or manufacturer ?
A: We are a manufacturer, committed to producing high accuracy, long-term stability, cost-efficient pressure/ level/ temperature/flow/ differential pressure measuring instruments.
Q: What is your terms of packing?
A: Generally, we pack our goods in brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q: What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q: How about your delivery time?
A: Generally, it will take 3 to 10 days after receiving your advance payment. The specific delivery time depends on the items and the quantity and stock of your order.
Q: Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Q: Which countries have you exported to ?
A: So far, we have sold our products to many countries and regions.Such as Germany ( like Siemens), Sweden, Spain, USA, Australia,Saudi Arabia,UAE,Brazil,Indonesia,Malaysia,India,Russia,South Africa etc.
A: 1 years from shipment date
Q: What is your shipping method?
A: Small orders are delivered with DHL, FedEx, TNT, UPS , EMS. Large orders are recommended to ship by sea or air.
Q: How long will you give me the reply?
A: We can support you 24Hours online service via email, skype, what'sapp, facebook etc within 1 hour.
Q: Are you trading company or manufacturer ?
A: We are a manufacturer, committed to producing high accuracy, long-term stability, cost-efficient pressure/ level/ temperature/flow/ differential pressure measuring instruments.
Q: What is your terms of packing?
A: Generally, we pack our goods in brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q: What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q: How about your delivery time?
A: Generally, it will take 3 to 10 days after receiving your advance payment. The specific delivery time depends on the items and the quantity and stock of your order.
Q: Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Q: Which countries have you exported to ?
A: So far, we have sold our products to many countries and regions.Such as Germany ( like Siemens), Sweden, Spain, USA, Australia,Saudi Arabia,UAE,Brazil,Indonesia,Malaysia,India,Russia,South Africa etc.
