Audited Supplier
CX2121 Multi-wire Saw
Five wire guide rollers design is mainly used to cut straight sheets of 5mm-60mm thickness.
>Double Workstation
The machine adopts double-station design and is able to cut two plates materials at the same time.
>Flexible Roller System
Achieve the cutting of products within 5-60mm thickness with the flexible wire winding for 3 rollers and five rollers.
>Easy Operation
Roller cutting system, workbench, tension system, take-up and pay-off and wire winding system are set in a plane for easy operation.
>Optimized Pulley Design
6 pulleys design can reduce wire breakage rate and achieve convenient wire winding.
>Flexible Cutting
The left and right slide table on the workbench can be independently moved back and forth, and the left and right sides can cut products of different thicknesses.
>Convenient Insttallation and Removal
The rollers are fastened with screws and equipped with special electric wrench for convenient disassembling and installation.
>Swing Cutting Function
Adding swing function to workbench to achieve the opening square cutting of semiconductor silicon carbide.
>Wire break memory system.
| Detail | Parameter |
| Model | CX2121 |
| Maximum work size | 204x210x210mm |
| Slice thickness | 5-60mm(wire winding number:≤40) |
| Workbench quantity | 2 |
| Roller out diameter *Workable width | (φ160-185mm)x210x5 |
| Wire diameter | φ0.20-φ0.37 |
Wire spool storage | 20km(φ0.25mm) |
| Maximum running speed | 1200m/min |
| Travel of worktable lifting | 240mm |
| Travel of worktable translation | 100mm |
Worktable swing angel | 0 |
| Cutting method | Vertically upward movement |
Cutting feed speed | 0.1~99.9mm/min |
Cutting fluid | Water-based cutting fluid or cutting oil |
| Fluid storage | 800L |
Fluid flow rate | 200L/min |
| Power supply | 380V±10% 50HZ |
| Power | 22Kw |
| Size L*W*H | 2200x1900x2400mm |
| Weight | 3000kg |
