Audited Supplier
D46
Metal
Forging
Roll Forging
Auto Parts
Iron
Normalizing
None
±1mm
GB
CE
ISO 9001: 2000
as Required
CE
China
8455219000
Product Description
Cross wedge rolling machine is widely used in forging connecting rod, crankshaft, camshaft, auto parts, etc., replace air hammer with the advantage of high productivity, efficiency, high rate of finished products. What's more, the tools can be used three times longer than air hammers.
Cross Wedge rolling mill is a highly efficient production processing technology of shaft forging, particularly suitable for rolling with the various steps shaft which is almost close to the final product shape required by customer, highly material utilization; which could allows blank to get an accurate distribution when used to mold forging billet, D46 series cross wedge rolling mill characteristics, compact conformation, nice appearance, small occupation area. Being equipped with brakes and clutch, which can achieve a continuous, semi-automatic single together with adjusting the operating mode; mounted worm and worm gear on the roller up and down linear movement to adjust the spacing of the roller. The following roll rotary motion by the phase adjusting mechanism in the gear box can be to adjust the phase of the mold; according to some overload protection device, make sure the security of the machine. The mill not only rolling a variety of large and medium-sized shaft, but also can be used as a forging production line system molding equipment for the forging process precision billets.
Cross wedge rolling machine: it has four work modes: adjusting, single, continious and auto. The upper roller can move up and down to adjust the distance between the rollers. The lower roller can rotate and adjust the phase postion with the phase position system in the gear box. The overload protection device inside can protect the machine. What's more, it is easy to install and repair for the tools with the openable guide plate mechanism.
| Model | D46-300 | D46-400 | D46-500 | D46-630 | D46-800 | D46-1000 | D46-1200 | D46-1400 | D46-1600 | |
| Parameter | ||||||||||
| Certral distance between two rollers | mm | 335 | 420 | 520 | 655 | 845 | 1050 | 1250 | 1460 | 1680 |
| Diameter of roller | mm | 240 | 320 | 400 | 500 | 640 | 800 | 1000 | 1200 | 1360 |
| Length of roller | mm | 450 | 500 | 500 | 600 | 900 | 1000 | 1200 | 1400 | 1500 |
| Max. length of billet | mm | 260 | 300 | 400 | 500 | 600 | 800 | 950 | 1100 | 1200 |
| Max. diameter of billet | mm | 35 | 45 | 55 | 65 | 85 | 110 | 130 | 150 | 180 |
| Adjustment distance of rollers | mm | ±15 | ±15 | ±25 | ±30 | ±35 | ±50 | ±55 | ±65 | ±80 |
| Rpm of roller | r/min | 28 | 23 | 15 | 12 | 8.5 | 6 | 4.5 | 4 | 3 |
| Phase adjustment of roller | ° | ±3° | ±3° | ±3° | ±3° | ±3° | ±3° | ±3° | ±3° | ±3° |
| Power of main motor | KW | 15 | 22 | 30 | 37 | 55 | 110 | 132(160) | 185 | 220 |
