Audited Supplier
HDGC3980
1 Year
1 Year
Storage Battery Tester
Charge and Discharge
Lead-acid Battery
Customized
HD Power
Wooden Box with Foam Inside
Made in China
9030899090
Product Description
HDGC3980 Battery Discharge Tester for 220V Battery Group
General information
HDGC3980 Battery Discharge Tester can be used as the discharge load in the battery off-line state to realize the constant discharge at the set value by regulating continuously the discharge current. When discharging, the tester will automatically stop discharging when the voltage on the battery group terminal or the cell falls to the set lower limit value, or when the set discharging time is out, or when it reaches the set discharging capacity. Battery Discharge Tester can records all valuable and continuous real-time data during the discharge process.
This tester system is simple, safe and accurate for monitoring voltage of cells adopting wireless connection.
Features
Technical Parameter
General information
HDGC3980 Battery Discharge Tester can be used as the discharge load in the battery off-line state to realize the constant discharge at the set value by regulating continuously the discharge current. When discharging, the tester will automatically stop discharging when the voltage on the battery group terminal or the cell falls to the set lower limit value, or when the set discharging time is out, or when it reaches the set discharging capacity. Battery Discharge Tester can records all valuable and continuous real-time data during the discharge process.
This tester system is simple, safe and accurate for monitoring voltage of cells adopting wireless connection.
Features
- PTC ceramic resistor is adopted to avoid the red heat phenomenon for a safer discharge process .
- Adopt smart ARM control and LCD display with easy operation.
- It can set termination condition of test and discharge, including cell battery voltage,battery pack end voltage,discharge current ,discharge time.
- Intelligent SCM ARM control, 7inch 1024*600 LCD screen , capacitive touch operation, built in English menu, simple and clear operation menu.
- It can record the process of test and discharge.Mainly total capacity of battery pack, total voltage and total current and voltage change of cell battery min voltage
- Real-time display,test and record the parameter of whole group voltage, it can automatically record after testing .
- Big LCD display, easy operation and high intelligence
- It can set control parameter voltage,current and time, automatically complete the test of battery pack .
- The test data can be recorded into U disk after discharge.The equipped data process software can deal with data information,analyze battery capacity and generate various charts.
- It can continue on last discharge process . Capacity and time can automatically record and accumulate to ensure the integrity of the discharge process
Technical Parameter
| Suitable Battery | DC 220V Battery Pack |
| Model No. | HDGC3980 |
| Discharge current | 0~100A |
| Discharge Voltage | DC 176-270V |
| Working mode | Single main unit, parallel master mode, parallel slave mode, and remote controlled mode |
| Protection performance | Over-voltage protection, under-voltage stop, over-current protection, reverse wiring protection, 65ºC over-temperature protection, LCD prompt and buzzer alarm |
| Cell voltage collection (optional) | Multi-band RF wireless module for communication distance of more than 100m, compatible with 2V/4V/6V/12V cell monitor module , 1-25 groups of RF wireless monitoring modules up to 300 batteries, and single wireless monitoring module for monitoring 12 cells |
| Control precision | Discharge current≤±1%; group voltage≤±0.1%; cell voltage≤±0.5% |
| PC communication | RS485 interface, USB interface |
| Work Environment | |
| Heat radiation | Forced air cooling |
| Temperature | Working rage: -5-50ºC Storage temperature: -40-70ºC |
| Humidity | Relative humidity 0-90% (40±2ºC) |
| Elevation | Below 4,000m |
| Noise | <75dB |
| Working Power Supply | |
| Voltage | Power supply: single-phase AC220V (-20%-+30%), frequency: 45-65Hz; |
| Electric strength test | Input-shell: 2200Vdc 1min Input-output: 2200Vdc 1min Output-shell: 700Vdc 1min |
| Safety | Compliance with EN610950 |
