Audited Supplier
Application:
These cables are designed for connecting photovoltaic system components inside and outside of buildings and equipment with high mechanical requirements and extreme weather conditions.
Standards:
2PfG 1169/08.2007 (PV1-F), TUV certificate, RHOS.
Electrical Properties
Rated Voltage U0/U: 0.6/1 kV AC; 0.9/1.5 kV DC
Maximum Permitted DC Voltage: 1.8 kV DC (conductor/conductor, non earthed system, circuit not under load)
Insulation Resistance: 1000 MΩ-km
Spark Test: 6000 Vac (8400 Vdc)
Voltage Withstand: 6500 Vac for 5 min
Thermal Properties
Maximum Voltage: Ambient Temperature: -40ºC ~ +90ºC
Maximum Temperature At Conductor: 120ºC (20000h) according to IEC/EN 60216-1
Short Circuit Temperature: 200ºC/5 sec
Thermal Endurance Test: According to EN 60216-2 (temperature index +120° C)
High Temperature Pressure Test: According to EN 60811-3-1
Damp-Heat Resistance: According to EN 60068-2-78 with 85% humidity
Mechanical Properties
Minimum Bending Radius: 4×OD (fixed), 5×OD (flexing)
Dynamic Penetration: According to 2 PfG 1169/08.2007 Annex F
Notch Propagation: According to 2 PfG 1169/08.2007 Annex G
Tensile Strength And Elongation Of Insulation And Jacket: According to EN 60811
Anticipated Period Of Use: 25 years
Chemical Properties
Ozone Resistance: According to EN 50396 part 8.1.3 Method B
Weathering- UV Resistance: According to HD 605/A1
Ammoniac resistant
Very good resistance to oils and chemicals
High wear and robust, abrasion resistant
Acid & Alkaline Resistance: According to EN 60811-2-1 (Oxal acid and sodium hydroxide)
Fire Performance
Flame retardant according to EN 50265-2-1, IEC 60332-1, VDE 0482-332-1-2, DIN EN 60332-1-2
Low smoke emission according to IEC 61034, EN 50268
Halogen free according to EN 50267-2-1, IEC 60754-1
Low corrosivity of gases according to EN 50267-2-2, IEC 60754-2
Specification
| Size mm2 | Conductor Diameter mm | Insulation Thickness mm | Sheath Thickness mm | Approximate O.D mm | Approximate Weight kg/km | 20ºC Maximum DC Resistance of the Conductor Ω/km |
| 1*1.5 | 1.58 | 0.7 | 0.7 | 4.5 | 32 | 13.7 |
| 1*2.5 | 2.02 | 0.7 | 0.7 | 5.0 | 43 | 8.21 |
| 1*4 | 2.58 | 0.7 | 0.8 | 5.7 | 62 | 5.09 |
| 1*6 | 3.17 | 0.75 | 0.8 | 6.4 | 85 | 3.39 |
| 1*10 | 5.5 | 0.8 | 0.8 | 8.9 | 192 | 1.24 |
| 1*25 | 6.7 | 0.8 | 0.9 | 10.3 | 284 | 0.795 |
| 1*35 | 8.2 | 0.8 | 0.9 | 11.8 | 384 | 0.565 |
How can I get some samples?
We provide free sample and will courier to you by DHL, FEDEX, UPS, TNT, etc. swiftly according to your requirements.
How do you control the quality?
QC department will control the quality during the full production process.
Inspector will inspect each item according to the order, inspection report will transfer to you before loading.
Any third party inspection will be accepted during the production or before loading, such as SGS, BV, etc.
After-sale dept will follow the order and pay high attention on the feedback from your side after all the products delivered. Any quality problem, we will arrange the technical personnel to solve and bear the corresponding customer losses..
What if the cable we need have some differences on specifications from yours?
Any differences, we can design and produce according to your requests.
What's the package of the goods?
Usually wooden or steel drum or coil, or according to your requirement
What's the lead time?
Usually 10-30 working days.
Welcome your inquiry and email soon......
